Teknik Belgeler
Özellikler
Marka
JSTSeri
XA
Hatve
2.5mm
Kontakların Sayısı
3
Sıraların Sayısı
1
Gövde Yönü
Düz
Örtülü/Örtüsüz
Örtülü
Konnektör Sistemi
Kablo - PCB
Montaj Tipi
Açık Delik
Sonlandırma Yöntemi
Lehim
Kontak Kaplaması
Kalay
Kontak Malzemesi
Bakır Alaşım
Akım Değeri
3.0A
Gerilim Değeri
250.0 V
Menşe
Japan
Ürün Ayrıntıları
JST XA Series 2.5mm Shrouded PCB Header Connectors
XA series wire to board shrouded PCB header connectors with a 2.5mm pitch. These XA 2.5 mm shrouded headers have a locking ramp device that provides a secure connection to the mating connector. This locking device also helps to prevent disconnection during the assembly process and due to vibration. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The housings of these XA series PCB headers are made from glass filled PA66 nylon which is effective against solder cracking problems. The header pins are rounded in design and reflow treated providing a low insertion force.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
7,826 TL
Each (In a Pack of 10) KDV Hariç
9,391 TL
Each (In a Pack of 10) KDV Dahil
10
7,826 TL
Each (In a Pack of 10) KDV Hariç
9,391 TL
Each (In a Pack of 10) KDV Dahil
10
Toptan Satın Al
Miktar | Birim Fiyat | Per Paket |
---|---|---|
10 - 240 | 7,826 TL | 78,26 TL |
250 - 990 | 4,386 TL | 43,86 TL |
1000 - 4990 | 4,128 TL | 41,28 TL |
5000 - 9990 | 3,87 TL | 38,70 TL |
10000+ | 3,655 TL | 36,55 TL |
Teknik Belgeler
Özellikler
Marka
JSTSeri
XA
Hatve
2.5mm
Kontakların Sayısı
3
Sıraların Sayısı
1
Gövde Yönü
Düz
Örtülü/Örtüsüz
Örtülü
Konnektör Sistemi
Kablo - PCB
Montaj Tipi
Açık Delik
Sonlandırma Yöntemi
Lehim
Kontak Kaplaması
Kalay
Kontak Malzemesi
Bakır Alaşım
Akım Değeri
3.0A
Gerilim Değeri
250.0 V
Menşe
Japan
Ürün Ayrıntıları
JST XA Series 2.5mm Shrouded PCB Header Connectors
XA series wire to board shrouded PCB header connectors with a 2.5mm pitch. These XA 2.5 mm shrouded headers have a locking ramp device that provides a secure connection to the mating connector. This locking device also helps to prevent disconnection during the assembly process and due to vibration. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The housings of these XA series PCB headers are made from glass filled PA66 nylon which is effective against solder cracking problems. The header pins are rounded in design and reflow treated providing a low insertion force.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.