Teknik Belgeler
Özellikler
Marka
TE ConnectivityKutup Biçimi
2P
Cinsiyet
Dişi
Yolların Sayısı
2
Fiş/Priz
Soket
Renk
Doğal
Tip
ITB Kenar Kart Konnektörü
Montaj Tipi
Yüzeye Monte
Akım Değeri
3A
Gerilim Değeri
250 V ac/dc
Sonlandırma Yöntemi
Lehim
Kontak Kaplaması
Nikel üstüne Kalay
Kontak Malzemesi
Bakır Alaşım
Ürün Ayrıntıları
TE Connectivity ITB (Inverted Through-Board) Card Edge Connector
ITB (Inverted Through-Board) card edge connectors for providing a direct power connection between driver boards to the underside of LED array boards. These SMT ITB LED lighting connectors have a cable-less space saving design with a low profile height of 1.5 mm above the PCB which minimises LED light obstruction. Single piece mating allows fast and easy assembly and the connectors can be surface mounted at the same time as other devices eliminating secondary processes. The housings of these card edge LED connectors have a round cornered design to reduce shadowing and SMT hold downs for stability during driver board mating and unmating.
Stock number 124-9423 is suitable for use with a PCB thickness of 1.0 mm
Stock number 124-9423 is suitable for use with a PCB thickness of 1.2 mm
TE Connectivity SMT and Thru-Hole Poke-In Wire Lighting Connectors
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
10
P.O.A.
10
Teknik Belgeler
Özellikler
Marka
TE ConnectivityKutup Biçimi
2P
Cinsiyet
Dişi
Yolların Sayısı
2
Fiş/Priz
Soket
Renk
Doğal
Tip
ITB Kenar Kart Konnektörü
Montaj Tipi
Yüzeye Monte
Akım Değeri
3A
Gerilim Değeri
250 V ac/dc
Sonlandırma Yöntemi
Lehim
Kontak Kaplaması
Nikel üstüne Kalay
Kontak Malzemesi
Bakır Alaşım
Ürün Ayrıntıları
TE Connectivity ITB (Inverted Through-Board) Card Edge Connector
ITB (Inverted Through-Board) card edge connectors for providing a direct power connection between driver boards to the underside of LED array boards. These SMT ITB LED lighting connectors have a cable-less space saving design with a low profile height of 1.5 mm above the PCB which minimises LED light obstruction. Single piece mating allows fast and easy assembly and the connectors can be surface mounted at the same time as other devices eliminating secondary processes. The housings of these card edge LED connectors have a round cornered design to reduce shadowing and SMT hold downs for stability during driver board mating and unmating.
Stock number 124-9423 is suitable for use with a PCB thickness of 1.0 mm
Stock number 124-9423 is suitable for use with a PCB thickness of 1.2 mm