Teknik Belgeler
Özellikler
Marka
Aim-TTiBant Genişliği
30 MHz → 1.8 GHz
Kanalların Sayısı
1
Dalga İzleri
Canlı, Referanslı, Görünüm
Tarama Modları
Sürekli, Tek
Ayarlama Modları
Merkez + Açıklık, Başlatma + Durdurma
Maksimum Frekans
1.3GHz
Minimum Frekans
1 MHz
Frekans Kararlılığı
±10ppm
Ekran Tipi
4,3 inç TFT
Ekran Boyutu
480 x 272piksel
İşaretleyiciler
İkili, Tek
RF Girişi
SMA Konnektör
Arabirim Tipi
USB
Masaüstü/Elde Kullanılan
Elde Kullanılan
Boyutlar
92 x 49 x 192mm
Minimum Çalışma Sıcaklığı
+5°C
Yükseklik
192mm
Genişlik
49mm
Model Number p
PSA1302
Uzunluk
92mm
Pil Ömrü
8 sa
Ağırlık
560g
Pil Tipi
Lityum İyon
Maksimum Çalışma Sıcaklığı
+40°C
Menşe
United Kingdom
Ürün Ayrıntıları
Aim-TTi PSA1302USC & PSA2702USC Spectrum Analyzers
Aim-TTi PSA Series II RF spectrum analyzers are big on performance but small on size and cost - lightweight, truly handheld instruments which incorporate extensive feature sets. Version PSA1302USC of standard product PSA1302 and version PSA2702USC of standard product PSA2702 are extended variants which include the firmware upgrade U01, the travel case, telescopic antenna and car charger. The firmware upgrade is pre-installed and all of the accessories, including the antenna and car charger, are supplied inside the fitted case.
The PSA Series II operates from a Li-ion rechargeable battery which can provide more than 8 hours of continuous operation (for continuous bench top operation it can be powered from its AC adaptor, which also recharges batteries in less than 3 hours). The instruments can be used vertically, horizontally or - by using the tilt stand - at an angle. The tilt stand can be unclipped from the back of the instrument and attached at the front to protect the screen during transport or act as a sun shield when viewing conditions are difficult. Robust rubberised buffers top and bottom of the instrument also facilitate use in the field. Applications include: traditional RF field measurements; EMC evaluations; product development and servicing; RFID measurements; frequency domain evaluation.
Supplied with
Universal voltage mains adaptor/charger, USB connection lead, spare stylus, BNC converter for trigger input, multi-language Short Guide, full users' manual (English only), support CD containing PDF versions of manuals and support software, Firmware Upgrade PSA-U01 (installed), telescopic antenna WB-ANT, vehicle charger PSA-VC and travel case PSA2-SC.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
Aim-TTiBant Genişliği
30 MHz → 1.8 GHz
Kanalların Sayısı
1
Dalga İzleri
Canlı, Referanslı, Görünüm
Tarama Modları
Sürekli, Tek
Ayarlama Modları
Merkez + Açıklık, Başlatma + Durdurma
Maksimum Frekans
1.3GHz
Minimum Frekans
1 MHz
Frekans Kararlılığı
±10ppm
Ekran Tipi
4,3 inç TFT
Ekran Boyutu
480 x 272piksel
İşaretleyiciler
İkili, Tek
RF Girişi
SMA Konnektör
Arabirim Tipi
USB
Masaüstü/Elde Kullanılan
Elde Kullanılan
Boyutlar
92 x 49 x 192mm
Minimum Çalışma Sıcaklığı
+5°C
Yükseklik
192mm
Genişlik
49mm
Model Number p
PSA1302
Uzunluk
92mm
Pil Ömrü
8 sa
Ağırlık
560g
Pil Tipi
Lityum İyon
Maksimum Çalışma Sıcaklığı
+40°C
Menşe
United Kingdom
Ürün Ayrıntıları
Aim-TTi PSA1302USC & PSA2702USC Spectrum Analyzers
Aim-TTi PSA Series II RF spectrum analyzers are big on performance but small on size and cost - lightweight, truly handheld instruments which incorporate extensive feature sets. Version PSA1302USC of standard product PSA1302 and version PSA2702USC of standard product PSA2702 are extended variants which include the firmware upgrade U01, the travel case, telescopic antenna and car charger. The firmware upgrade is pre-installed and all of the accessories, including the antenna and car charger, are supplied inside the fitted case.
The PSA Series II operates from a Li-ion rechargeable battery which can provide more than 8 hours of continuous operation (for continuous bench top operation it can be powered from its AC adaptor, which also recharges batteries in less than 3 hours). The instruments can be used vertically, horizontally or - by using the tilt stand - at an angle. The tilt stand can be unclipped from the back of the instrument and attached at the front to protect the screen during transport or act as a sun shield when viewing conditions are difficult. Robust rubberised buffers top and bottom of the instrument also facilitate use in the field. Applications include: traditional RF field measurements; EMC evaluations; product development and servicing; RFID measurements; frequency domain evaluation.
Supplied with
Universal voltage mains adaptor/charger, USB connection lead, spare stylus, BNC converter for trigger input, multi-language Short Guide, full users' manual (English only), support CD containing PDF versions of manuals and support software, Firmware Upgrade PSA-U01 (installed), telescopic antenna WB-ANT, vehicle charger PSA-VC and travel case PSA2-SC.