Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsSensör Tipi
Hall Etkisi Sensörleri
Montaj Tipi
Açık Delik
Manyetik Tipi
Tek Kutuplu
Maksimum Çalışma Besleme Gerilimi
24 V
Minimum Çalışma Besleme Gerilimi
3 V
Yükseklik
3.02mm
Boyutlar
4.09 x 1.52 x 3.02mm
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-40°C
Paket Tipi
SIP
Tipik Manyetik Sensör Histerezisi
10 Gs
Ürün Ayrıntıları
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
35,776 TL
Each (Supplied on a Reel) KDV Hariç
42,931 TL
Each (Supplied on a Reel) KDV Dahil
5
35,776 TL
Each (Supplied on a Reel) KDV Hariç
42,931 TL
Each (Supplied on a Reel) KDV Dahil
5
Toptan Satın Al
Miktar | Birim Fiyat | Per Makara |
---|---|---|
5 - 20 | 35,776 TL | 178,88 TL |
25 - 95 | 29,756 TL | 148,78 TL |
100 - 245 | 24,338 TL | 121,69 TL |
250 - 495 | 22,876 TL | 114,38 TL |
500+ | 21,50 TL | 107,50 TL |
Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsSensör Tipi
Hall Etkisi Sensörleri
Montaj Tipi
Açık Delik
Manyetik Tipi
Tek Kutuplu
Maksimum Çalışma Besleme Gerilimi
24 V
Minimum Çalışma Besleme Gerilimi
3 V
Yükseklik
3.02mm
Boyutlar
4.09 x 1.52 x 3.02mm
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-40°C
Paket Tipi
SIP
Tipik Manyetik Sensör Histerezisi
10 Gs
Ürün Ayrıntıları
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.