Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsSensör Tipi
Hall Etkisi Sensörleri
Montaj Tipi
Açık Delik
Manyetik Tipi
Çift Kutuplu
Maksimum Çalışma Besleme Gerilimi
24 V
Minimum Çalışma Besleme Gerilimi
3 V
Yükseklik
3.02mm
Boyutlar
4.09 x 1.52 x 3.02mm
Minimum Çalışma Sıcaklığı
-40°C
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
+150°C
Paket Tipi
SIP
Tipik Manyetik Sensör Histerezisi
45 Gs
Ürün Ayrıntıları
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
Hall Effect Sensors, Allegro MicroSystems
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
37,238 TL
Each (Supplied in a Bag) KDV Hariç
44,686 TL
Each (Supplied in a Bag) KDV Dahil
5
37,238 TL
Each (Supplied in a Bag) KDV Hariç
44,686 TL
Each (Supplied in a Bag) KDV Dahil
5
Toptan Satın Al
Miktar | Birim Fiyat | Per Bag |
---|---|---|
5 - 20 | 37,238 TL | 186,19 TL |
25 - 95 | 29,24 TL | 146,20 TL |
100 - 245 | 24,166 TL | 120,83 TL |
250 - 495 | 21,50 TL | 107,50 TL |
500+ | 20,984 TL | 104,92 TL |
Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsSensör Tipi
Hall Etkisi Sensörleri
Montaj Tipi
Açık Delik
Manyetik Tipi
Çift Kutuplu
Maksimum Çalışma Besleme Gerilimi
24 V
Minimum Çalışma Besleme Gerilimi
3 V
Yükseklik
3.02mm
Boyutlar
4.09 x 1.52 x 3.02mm
Minimum Çalışma Sıcaklığı
-40°C
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
+150°C
Paket Tipi
SIP
Tipik Manyetik Sensör Histerezisi
45 Gs
Ürün Ayrıntıları
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.