Teknik Belgeler
Özellikler
Besleme Gerilimi
250 V ac, 300V dc
Güvenlik Kontakları
NO/NC
Muhafaza Malzemesi
ABS
Bağlantı Tipi
10 m Kablo
Aktüatör Tipi
Manyetik
Yardımcı Kontaklar
NC
Sensör Prensibi
Manyetik
Aktüatör Dahil
Yes
Aralık
Sipha
Anahtarlama Mesafesi
9 mm
Seri
440N
IP Değeri
IP67
Besleme Akımı
500mA
Derinlik
19mm
Genişlik
19mm
Uzunluk
82mm
Karşılanan Standartlar
ANSI B11.19, AS4024.1, CE Listed, cULus Listed, EN1088, EN954-1, IEC/EN60204-1, IEC/EN60947-5-3, IEC60947-5-1, ISO13849-1, ISO14119, NFPA79, TUV
Menşe
Dominican Republic
Ürün Ayrıntıları
Allen-Bradley Sipha S2 Non-contact Safety Switch
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Supplied with
Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
5.675,53 TL
Each KDV Hariç
6.810,64 TL
Each KDV Dahil
1
5.675,53 TL
Each KDV Hariç
6.810,64 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Besleme Gerilimi
250 V ac, 300V dc
Güvenlik Kontakları
NO/NC
Muhafaza Malzemesi
ABS
Bağlantı Tipi
10 m Kablo
Aktüatör Tipi
Manyetik
Yardımcı Kontaklar
NC
Sensör Prensibi
Manyetik
Aktüatör Dahil
Yes
Aralık
Sipha
Anahtarlama Mesafesi
9 mm
Seri
440N
IP Değeri
IP67
Besleme Akımı
500mA
Derinlik
19mm
Genişlik
19mm
Uzunluk
82mm
Karşılanan Standartlar
ANSI B11.19, AS4024.1, CE Listed, cULus Listed, EN1088, EN954-1, IEC/EN60204-1, IEC/EN60947-5-3, IEC60947-5-1, ISO13849-1, ISO14119, NFPA79, TUV
Menşe
Dominican Republic
Ürün Ayrıntıları
Allen-Bradley Sipha S2 Non-contact Safety Switch
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Supplied with
Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.