Teknik Belgeler
Özellikler
Marka
Amphenol ICCKontakların Sayısı
8
Sıraların Sayısı
2
Hatve
1.27 mm, 2.54mm
Tip
Tel - Kart
Montaj Tipi
Açık Delik
Gövde Yönü
Dik Açı
Sonlandırma Yöntemi
Lehim
Akım Değeri
12A
Gerilim Değeri
230 V
Seri
TMM
Kontak Malzemesi
Bronz
Menşe
China
Ürün Ayrıntıları
DIP Female Headers with Lock
These Amphenol DIP TMM MicroMatch 1.27 mm pitch range of female Headers with Lock allow Board to Board or Wire to Board connections. When mated with the appropriate TMM MicroMatch male Header (see stock number 739-1091 typical) they provide a Board to Board spacing of 7.1mm. They may also be mated with an appropriate TMM MicroMatch IDC male connector (see stock number 739-1013 typical) to provide a Wire to Board connection. The design of these TMM MicroMatch female Headers gives improved retention by incorporating a Locking Latch.
1.27mm IDC - Amphenol TMM Range
A range of Amphenol TMM MicroMatch 1.27 mm pitch (staggered contact spacing) Board to Board or Wire to Board connectors rated at 1.5 A, 230 Vac RMS 60 Hz, DC. These TMM MicroMatch connectors are available in even number of positions from 4 to 26. All the TMM MicroMatch contacts are fully tinned with the PCB tails also being kinked to improve header retention during soldering operations. Locking latches are available on the female TMM MicroMatch connectors and the male connectors have a polarization guide to ensure correct orientation.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
12,47 TL
Each (In a Bag of 500) KDV Hariç
14,964 TL
Each (In a Bag of 500) KDV Dahil
500
12,47 TL
Each (In a Bag of 500) KDV Hariç
14,964 TL
Each (In a Bag of 500) KDV Dahil
500
Teknik Belgeler
Özellikler
Marka
Amphenol ICCKontakların Sayısı
8
Sıraların Sayısı
2
Hatve
1.27 mm, 2.54mm
Tip
Tel - Kart
Montaj Tipi
Açık Delik
Gövde Yönü
Dik Açı
Sonlandırma Yöntemi
Lehim
Akım Değeri
12A
Gerilim Değeri
230 V
Seri
TMM
Kontak Malzemesi
Bronz
Menşe
China
Ürün Ayrıntıları
DIP Female Headers with Lock
These Amphenol DIP TMM MicroMatch 1.27 mm pitch range of female Headers with Lock allow Board to Board or Wire to Board connections. When mated with the appropriate TMM MicroMatch male Header (see stock number 739-1091 typical) they provide a Board to Board spacing of 7.1mm. They may also be mated with an appropriate TMM MicroMatch IDC male connector (see stock number 739-1013 typical) to provide a Wire to Board connection. The design of these TMM MicroMatch female Headers gives improved retention by incorporating a Locking Latch.
1.27mm IDC - Amphenol TMM Range
A range of Amphenol TMM MicroMatch 1.27 mm pitch (staggered contact spacing) Board to Board or Wire to Board connectors rated at 1.5 A, 230 Vac RMS 60 Hz, DC. These TMM MicroMatch connectors are available in even number of positions from 4 to 26. All the TMM MicroMatch contacts are fully tinned with the PCB tails also being kinked to improve header retention during soldering operations. Locking latches are available on the female TMM MicroMatch connectors and the male connectors have a polarization guide to ensure correct orientation.