Teknik Belgeler
Özellikler
Marka
Analog DevicesRF Teknolojisi
RF Diyagramı, RMS Dedektörü
Kit Sınıflandırması
Değerlendirme Kartı
Öne Çıkan Cihaz
ADL5511
Frekans
6GHz
Kit Adı
TruPwr
Ürün Ayrıntıları
Evaluation Board for ADL5511 DC to 6GHz Envelope and TruPwr RMS Detector
The ADL5511-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5V/100mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The RF input signals are applied to an edge-mounted SMA type RF connector (RFIN). The envelope output signal is accessible via the SMA connector labeled VENV. The RMS output and envelope reference signals are accessible on the clip leads labeled VRMA and EREF. To access the RMS output and envelope reference output via SMA cables, SMA connectors can be soldered on to the pads labeled VRMS1 and EREF1.
RF & Microwave, Analog Devices
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
7.564,95 TL
Each KDV Hariç
9.077,94 TL
Each KDV Dahil
1
7.564,95 TL
Each KDV Hariç
9.077,94 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
Analog DevicesRF Teknolojisi
RF Diyagramı, RMS Dedektörü
Kit Sınıflandırması
Değerlendirme Kartı
Öne Çıkan Cihaz
ADL5511
Frekans
6GHz
Kit Adı
TruPwr
Ürün Ayrıntıları
Evaluation Board for ADL5511 DC to 6GHz Envelope and TruPwr RMS Detector
The ADL5511-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5V/100mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The RF input signals are applied to an edge-mounted SMA type RF connector (RFIN). The envelope output signal is accessible via the SMA connector labeled VENV. The RMS output and envelope reference signals are accessible on the clip leads labeled VRMA and EREF. To access the RMS output and envelope reference output via SMA cables, SMA connectors can be soldered on to the pads labeled VRMS1 and EREF1.