EAO Push Button Switch for Use with Series 31 Push Buttons
Teknik Belgeler
Özellikler
Marka
EAOAksesuar Tipi
Illuminated Push Button Switch
Şununla Birlikte Kullanım İçin
Series 31 Push Buttons
Seri
31
IP Değeri
IP40
Kontak Akımı Değeri
42 V'de 100 mA
Aktüatör Şekli
Dikdörtgen
Aktüatör Tipi
Düğme
Terminal Tipi
Açık Delikli
Aktüatör Çapı
18mm
Montaj Tipi
PCB
Toplam Derinlik
46.5mm
Aktüatör Malzemesi
Poliamit
Menşe
Switzerland
Ürün Ayrıntıları
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Standards
EN 61058
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
1.104,22 TL
Each KDV Hariç
1.325,06 TL
Each KDV Dahil
1
1.104,22 TL
Each KDV Hariç
1.325,06 TL
Each KDV Dahil
1
Toptan Satın Al
| Miktar | Birim Fiyat |
|---|---|
| 1 - 9 | 1.104,22 TL |
| 10 - 49 | 1.043,59 TL |
| 50 - 99 | 1.003,64 TL |
| 100+ | 968,39 TL |
Teknik Belgeler
Özellikler
Marka
EAOAksesuar Tipi
Illuminated Push Button Switch
Şununla Birlikte Kullanım İçin
Series 31 Push Buttons
Seri
31
IP Değeri
IP40
Kontak Akımı Değeri
42 V'de 100 mA
Aktüatör Şekli
Dikdörtgen
Aktüatör Tipi
Düğme
Terminal Tipi
Açık Delikli
Aktüatör Çapı
18mm
Montaj Tipi
PCB
Toplam Derinlik
46.5mm
Aktüatör Malzemesi
Poliamit
Menşe
Switzerland
Ürün Ayrıntıları
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Standards
EN 61058