Microchip HV9910BDB3 Supertex LED Sürücü Geliştirme Board’u, HV9910
Teknik Belgeler
Özellikler
Marka
MicrochipLED Teknolojisi
LED Sürücü
Kit Sınıflandırması
Değerlendirme Kartı
Öne Çıkan Cihaz
HV9910
Kit Adı
Supertex
Menşe
United States
Ürün Ayrıntıları
HV9910BDB3 Supertex Low Voltage High Current LED Driver IC Evaluation Board
The HV9910BDB3 is a low voltage high current LED driver IC evaluation board from Supertex Inc. (a subsidiary of Microchip Technology) designed to drive one LED or two LEDs in series at currents up to 1.0A from a 10 – 30 VDC input. Featured on-board is the HV9910B universal LED driver IC which is used to drive a buck converter. The HV9910BDB3 can be configured to operate in either a constant frequency mode (for driving a single LED) or in a constant off-time mode (for driving two LEDs). The output current can be adjusted in two ways – either with linear dimming using the on-board potentiometer or with PWM dimming by applying a TTL – compatible square wave signal at the PWMD terminal. Using linear dimming, the output current of the HV9910DB1 can be lowered to about 0.01A (note: zero output current can be obtained only by PWM dimming).
LED Drivers, Microchip
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
MicrochipLED Teknolojisi
LED Sürücü
Kit Sınıflandırması
Değerlendirme Kartı
Öne Çıkan Cihaz
HV9910
Kit Adı
Supertex
Menşe
United States
Ürün Ayrıntıları
HV9910BDB3 Supertex Low Voltage High Current LED Driver IC Evaluation Board
The HV9910BDB3 is a low voltage high current LED driver IC evaluation board from Supertex Inc. (a subsidiary of Microchip Technology) designed to drive one LED or two LEDs in series at currents up to 1.0A from a 10 – 30 VDC input. Featured on-board is the HV9910B universal LED driver IC which is used to drive a buck converter. The HV9910BDB3 can be configured to operate in either a constant frequency mode (for driving a single LED) or in a constant off-time mode (for driving two LEDs). The output current can be adjusted in two ways – either with linear dimming using the on-board potentiometer or with PWM dimming by applying a TTL – compatible square wave signal at the PWMD terminal. Using linear dimming, the output current of the HV9910DB1 can be lowered to about 0.01A (note: zero output current can be obtained only by PWM dimming).