Teknik Belgeler
Özellikler
Marka
Phoenix ContactModül Tipi
Sıcaklık Dönüştürücü
Giriş Sinyali Tipi
RTD
Çıkış Sinyal Tipi
Akım, Gerilim
Giriş Aralığı
0 → 4000 Ω, -200 → +850°C
Çıkış Aralığı
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Maksimum Gerilim
9.6 → 30V dc
Tehlikeli Alan Sertifikası
ATEX
Montaj Tipi
DIN Rayı
Çalışma Sıcaklığı Aralığı
-20 → +65°C
Seri
3RS7025
Karşılanan Standartlar
UL
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
+65°C
Menşe
Germany
Ürün Ayrıntıları
Configurable Resistance Thermometer Transducer
The 2902849 from Phoenix Contact is a 3-way, configurable isolated temperature transducer. This temperature transducer is designed to be used with resistance thermometers and remote resistance type sensors in 2,3 and 4-wire connections. 2902849 also allows easy customisation and configuration either by the DIP switch located on the side of the module or via the S port using FGT/DTM software. Not to mention, this module is rated to be installed in zone 2 areas.
This device also contains a red LED to allow for easy error diagnostics. It will flash or stay static depending on the error.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
8.247,47 TL
Each KDV Hariç
9.896,96 TL
Each KDV Dahil
1
8.247,47 TL
Each KDV Hariç
9.896,96 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
Phoenix ContactModül Tipi
Sıcaklık Dönüştürücü
Giriş Sinyali Tipi
RTD
Çıkış Sinyal Tipi
Akım, Gerilim
Giriş Aralığı
0 → 4000 Ω, -200 → +850°C
Çıkış Aralığı
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Maksimum Gerilim
9.6 → 30V dc
Tehlikeli Alan Sertifikası
ATEX
Montaj Tipi
DIN Rayı
Çalışma Sıcaklığı Aralığı
-20 → +65°C
Seri
3RS7025
Karşılanan Standartlar
UL
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
+65°C
Menşe
Germany
Ürün Ayrıntıları
Configurable Resistance Thermometer Transducer
The 2902849 from Phoenix Contact is a 3-way, configurable isolated temperature transducer. This temperature transducer is designed to be used with resistance thermometers and remote resistance type sensors in 2,3 and 4-wire connections. 2902849 also allows easy customisation and configuration either by the DIP switch located on the side of the module or via the S port using FGT/DTM software. Not to mention, this module is rated to be installed in zone 2 areas.
This device also contains a red LED to allow for easy error diagnostics. It will flash or stay static depending on the error.