Teknik Belgeler
Özellikler
Seviyelerin Sayısı
Tek
Renk
Gri
Toplam Uzunluk
19.7 inç
Sonlandırma Yöntemi
Vida
Akım Değeri
30A
Gerilim Değeri
500 V
Boyutlar
8x10.5mm
Marka
Phoenix ContactSeri
UT 2.5-QUATTRO
Menşe
Germany
Ürün Ayrıntıları
RN-131 802.11b/g Wi-Fi Evaluation Kit
The RN-131-EK is a Wi-Fi evaluation kit for the RN131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board also includes two convenient push buttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN131 module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. Additionally, the module can automatically wake up, send data to a remote host and then go back to a low-power sleep state.
Supplied with
USB cable
WLAN (Wireless Local Area Network) - Microchip Technology
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
5
P.O.A.
5
Teknik Belgeler
Özellikler
Seviyelerin Sayısı
Tek
Renk
Gri
Toplam Uzunluk
19.7 inç
Sonlandırma Yöntemi
Vida
Akım Değeri
30A
Gerilim Değeri
500 V
Boyutlar
8x10.5mm
Marka
Phoenix ContactSeri
UT 2.5-QUATTRO
Menşe
Germany
Ürün Ayrıntıları
RN-131 802.11b/g Wi-Fi Evaluation Kit
The RN-131-EK is a Wi-Fi evaluation kit for the RN131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board also includes two convenient push buttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN131 module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. Additionally, the module can automatically wake up, send data to a remote host and then go back to a low-power sleep state.
Supplied with
USB cable