RS PRO, 17150.4 Serisi Ayırma Klemensi, Siyah, 5 x 20 mm, 5 x 25 mm, 5 x 30 mm Sigorta
Teknik Belgeler
Özellikler
Marka
RS ProRenk
Siyah
Seviyelerin Sayısı
Tek
Amerikan Tel Ölçüsü
22 → 11AWG
Seri
17150.4
Sonlandırma Yöntemi
Vida
Gerilim Değeri
600 V
Akım Değeri
10 (IEC) A, 16 (cUL) A, 16 (UL) A
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+140°C
Ürün Ayrıntıları
SSIK Series Fuse-Disconnect Terminals
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +140°C (RTI elec.) and open up new application possibilities in electrical engineering. They have good dimensional stability up to high temperature ranges.
The SSIK fuse-disconnect terminals feature an extraction lever that locks into its end position and allows a spare fuse to be attached from the side. The following micro-fuses can be attached: SSIC 4 (5x20/5x25/5x30) and SSIC 6 (6.3x25/6.3x32)
Two cross-connection channels within the fuse-disconnect terminals allow for potentials to be distributed to adjacent fused and feed-through terminals from the SRK series. For multiplying the potentials, we offer the SQI standard accessory, available with from 2 to 30 poles. An additional connection (an SMAG) can also be attached to the outlet side. Two or three extraction levers can be coupled and operated simultaneously by using the VBS connection sleeves.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
RS ProRenk
Siyah
Seviyelerin Sayısı
Tek
Amerikan Tel Ölçüsü
22 → 11AWG
Seri
17150.4
Sonlandırma Yöntemi
Vida
Gerilim Değeri
600 V
Akım Değeri
10 (IEC) A, 16 (cUL) A, 16 (UL) A
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+140°C
Ürün Ayrıntıları
SSIK Series Fuse-Disconnect Terminals
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +140°C (RTI elec.) and open up new application possibilities in electrical engineering. They have good dimensional stability up to high temperature ranges.
The SSIK fuse-disconnect terminals feature an extraction lever that locks into its end position and allows a spare fuse to be attached from the side. The following micro-fuses can be attached: SSIC 4 (5x20/5x25/5x30) and SSIC 6 (6.3x25/6.3x32)
Two cross-connection channels within the fuse-disconnect terminals allow for potentials to be distributed to adjacent fused and feed-through terminals from the SRK series. For multiplying the potentials, we offer the SQI standard accessory, available with from 2 to 30 poles. An additional connection (an SMAG) can also be attached to the outlet side. Two or three extraction levers can be coupled and operated simultaneously by using the VBS connection sleeves.