Teknik Belgeler
Özellikler
Marka
Sensata / CrydomKutupların Sayısı
3
Kontak Gerilim Değeri
480 V ac
Kontak Akımı Değeri
500 mA
Seri
DRC
Aralık
Crydom
İşlev
Ters Çevirme
Yardımcı Kontakların Sayısı
2
Yardımcı Kontaklar Yapılandırması
1NO/1NC
Terminal Tipi
Vida
Genişlik
86.7mm
Uzunluk
45.3mm
Derinlik
95.6mm
Maksimum Çalışma Sıcaklığı
+60°C
Yük Akımı
4.8A
Kontrol Gerilimi
18 V ac → 30 V ac, 18 V dc → 30 V dc
Kutup ve Atım Yapılandırması
SPDT
Montaj Stili
DIN Rail
Yük Gerilimi
48 V ac → 510V ac
Minimum Çalışma Sıcaklığı
-20°C
Giriş Akımı
32mA
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
Sensata / CrydomKutupların Sayısı
3
Kontak Gerilim Değeri
480 V ac
Kontak Akımı Değeri
500 mA
Seri
DRC
Aralık
Crydom
İşlev
Ters Çevirme
Yardımcı Kontakların Sayısı
2
Yardımcı Kontaklar Yapılandırması
1NO/1NC
Terminal Tipi
Vida
Genişlik
86.7mm
Uzunluk
45.3mm
Derinlik
95.6mm
Maksimum Çalışma Sıcaklığı
+60°C
Yük Akımı
4.8A
Kontrol Gerilimi
18 V ac → 30 V ac, 18 V dc → 30 V dc
Kutup ve Atım Yapılandırması
SPDT
Montaj Stili
DIN Rail
Yük Gerilimi
48 V ac → 510V ac
Minimum Çalışma Sıcaklığı
-20°C
Giriş Akımı
32mA
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.