Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
2
Sıraların Sayısı
1
Hatve
1.5mm
Tip
Tel - Kart
Montaj Tipi
Yüzeye Monte
Gövde Yönü
Düz
Sonlandırma Yöntemi
Lehim
Akım Değeri
12A
Gerilim Değeri
50 V
Kontak Malzemesi
Bakır
Menşe
United States
Ürün Ayrıntıları
TE Connectivity Inverted SMT Through Board Connectors
Inverted SMT through board connectors designed to bring power to LED aluminium clad and FR4 boards from the underside of the PCB. The design of this connector eliminates wire dress management issues on the LED PCB. The connector is positioned on the PCB using a cutout or notch in the PCB. These inverted SMT lighting connectors have a low profile design and rounded corners to minimize shadowing. The top of the connector is flat to allow vacuum pick-up. Surface mount hold downs provide stability during mating and unmating. The housings of the connectors are made from high temperature thermoplastic allowing them to be used in reflow processing. These inverted SMT through board lighting connectors mate with the Mini CT connectors.
TE Connectivity SMT and Thru-Hole Poke-In Wire Lighting Connectors
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
2250
P.O.A.
2250
Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
2
Sıraların Sayısı
1
Hatve
1.5mm
Tip
Tel - Kart
Montaj Tipi
Yüzeye Monte
Gövde Yönü
Düz
Sonlandırma Yöntemi
Lehim
Akım Değeri
12A
Gerilim Değeri
50 V
Kontak Malzemesi
Bakır
Menşe
United States
Ürün Ayrıntıları
TE Connectivity Inverted SMT Through Board Connectors
Inverted SMT through board connectors designed to bring power to LED aluminium clad and FR4 boards from the underside of the PCB. The design of this connector eliminates wire dress management issues on the LED PCB. The connector is positioned on the PCB using a cutout or notch in the PCB. These inverted SMT lighting connectors have a low profile design and rounded corners to minimize shadowing. The top of the connector is flat to allow vacuum pick-up. Surface mount hold downs provide stability during mating and unmating. The housings of the connectors are made from high temperature thermoplastic allowing them to be used in reflow processing. These inverted SMT through board lighting connectors mate with the Mini CT connectors.