Time Electronic Akım Döngü Kalibratörü 7007, 20mA, RS Kalibrasyonlu
Teknik Belgeler
Özellikler
Marka
Time ElectronicsMutlak Maksimum Akım Ölçümü
20mA
Kalibre Edilmiş
RSCAL
En İyi Doğruluk
%±0,05
Pil Tipi
9 V
Pil Ömrü
40 h
Güç Kaynağı
Batarya
Ağırlık
200g
Yükseklik
140mm
Uzunluk
30mm
Maksimum Çalışma Sıcaklığı
+50°C
Minimum Çalışma Sıcaklığı
0°C
Genişlik
65mm
Model Number p
7007
Menşe
United Kingdom
Ürün Ayrıntıları
Zaman Elektroniği Döngüsü - Montaj İlişkisi 1 Ve 2 Akım Döngüsü Kalibratörü
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
Calibration type
RS Kalibrasyonlu
1
Teklif İsteyiniz
Calibration type
RS Kalibrasyonlu
1
Teknik Belgeler
Özellikler
Marka
Time ElectronicsMutlak Maksimum Akım Ölçümü
20mA
Kalibre Edilmiş
RSCAL
En İyi Doğruluk
%±0,05
Pil Tipi
9 V
Pil Ömrü
40 h
Güç Kaynağı
Batarya
Ağırlık
200g
Yükseklik
140mm
Uzunluk
30mm
Maksimum Çalışma Sıcaklığı
+50°C
Minimum Çalışma Sıcaklığı
0°C
Genişlik
65mm
Model Number p
7007
Menşe
United Kingdom
Ürün Ayrıntıları
Zaman Elektroniği Döngüsü - Montaj İlişkisi 1 Ve 2 Akım Döngüsü Kalibratörü
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual