Adafruit İşlemci ve Mikrodenetleyici Kiti

Teknik Belgeler
Özellikler
Marka
ADAFRUIT INDUSTRIESSınıflandırma
Geliştirme Panosu
Kit Adı
GEMMA V2
Teknoloji
Giyilebilir
İşlemci Parça Numarası
ATtiny85
İşlemci Tipi
MCU
Distrelec Product Id
30091135
Menşe
United States
Ürün Ayrıntıları
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.
Adafruit GEMMA Wearable Platform
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
ADAFRUIT INDUSTRIESSınıflandırma
Geliştirme Panosu
Kit Adı
GEMMA V2
Teknoloji
Giyilebilir
İşlemci Parça Numarası
ATtiny85
İşlemci Tipi
MCU
Distrelec Product Id
30091135
Menşe
United States
Ürün Ayrıntıları
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.