ITT Cannon T2P Serisi Dairesel Konnektör Crimp Kontak, Dişi, Crimp Kontak Terminasyonlu, 16A
Teknik Belgeler
Özellikler
Marka
ITT CannonCinsiyet
Dişi
Tel Boyutu
18 → 16 AWG
Sonlandırma Yöntemi
Sıkıştırma
Seri
T2P
Kontak Tipi
Sinyal
Akım Değeri
16A
Uzunluk
18.42mm
Kontak Kaplaması
Kalay
Kontak Malzemesi
Bakır Alaşım
Maksimum Kontak Direnci
5mΩ
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+125°C
Montaj Tipi
Kablo Montajı
Menşe
Germany
Ürün Ayrıntıları
Sinyal Kontakları
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Teklif İsteyiniz
Each (In a Pack of 10) (KDV Hariç)
10
Teklif İsteyiniz
Each (In a Pack of 10) (KDV Hariç)
10
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
ITT CannonCinsiyet
Dişi
Tel Boyutu
18 → 16 AWG
Sonlandırma Yöntemi
Sıkıştırma
Seri
T2P
Kontak Tipi
Sinyal
Akım Değeri
16A
Uzunluk
18.42mm
Kontak Kaplaması
Kalay
Kontak Malzemesi
Bakır Alaşım
Maksimum Kontak Direnci
5mΩ
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+125°C
Montaj Tipi
Kablo Montajı
Menşe
Germany
Ürün Ayrıntıları
Sinyal Kontakları
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.