TE Connectivity Black, Fluid Resistant Elastomer
Teknik Belgeler
Özellikler
Marka
TE ConnectivityYapışkan Astarlı Parça
No
Malzeme
Sıvıya Dayanıklı Elastomer
Renk
Siyah
Minimum Çalışma Sıcaklığı
-75°C
Maksimum Çalışma Sıcaklığı
+150°C
Seri
222K1
Ürün Ayrıntıları
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
1.317,79 TL
1.317,79 TL Each (KDV Hariç)
1.581,35 TL
1.581,35 TL Each KDV Dahil
1
1.317,79 TL
1.317,79 TL Each (KDV Hariç)
1.581,35 TL
1.581,35 TL Each KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
| Miktar | Birim Fiyat |
|---|---|
| 1 - 14 | 1.317,79 TL |
| 15 - 49 | 1.274,86 TL |
| 50+ | 1.223,98 TL |
Teknik Belgeler
Özellikler
Marka
TE ConnectivityYapışkan Astarlı Parça
No
Malzeme
Sıvıya Dayanıklı Elastomer
Renk
Siyah
Minimum Çalışma Sıcaklığı
-75°C
Maksimum Çalışma Sıcaklığı
+150°C
Seri
222K1
Ürün Ayrıntıları
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.