2478 Adafruit Gösterge Modülü
Teknik Belgeler
Özellikler
Marka
ADAFRUIT INDUSTRIESÇapraz Ekran Boyutu
2.4inç
Ekran Teknolojisi
Dirençli Dokunmatik Ekran
Kit Sınıflandırması
Ekran Modülü
Kit Adı
TFT LCD Display
Şununla Birlikte Kullanım İçin
Geliştirme Projeleri
Teknoloji
TFT Ekran
Sınıflandırma
LCD Touchscreen
Menşe
United States
Ürün Ayrıntıları
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
Adafruit LCD Touchscreens
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
ADAFRUIT INDUSTRIESÇapraz Ekran Boyutu
2.4inç
Ekran Teknolojisi
Dirençli Dokunmatik Ekran
Kit Sınıflandırması
Ekran Modülü
Kit Adı
TFT LCD Display
Şununla Birlikte Kullanım İçin
Geliştirme Projeleri
Teknoloji
TFT Ekran
Sınıflandırma
LCD Touchscreen
Menşe
United States
Ürün Ayrıntıları
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.