Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsSensör Tipi
Hall Etkisi Sensörleri
Montaj Tipi
Yüzeye Monte
Manyetik Tipi
Omnipolar
Maksimum Çalışma Besleme Gerilimi
3,5 V
Minimum Çalışma Besleme Gerilimi
2,5 V
Paket Tipi
SOT-23
Yükseklik
0.95mm
Boyutlar
2.98 x 1.91 x 0.95mm
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-40°C
Tipik Manyetik Sensör Histerezisi
5,9 Gs
Ürün Ayrıntıları
A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.
Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.
Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.
Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.
Hall Effect Sensors, Allegro MicroSystems
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
17,286 TL
Each (In a Pack of 5) KDV Hariç
20,743 TL
Each (In a Pack of 5) KDV Dahil
5
17,286 TL
Each (In a Pack of 5) KDV Hariç
20,743 TL
Each (In a Pack of 5) KDV Dahil
5
Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsSensör Tipi
Hall Etkisi Sensörleri
Montaj Tipi
Yüzeye Monte
Manyetik Tipi
Omnipolar
Maksimum Çalışma Besleme Gerilimi
3,5 V
Minimum Çalışma Besleme Gerilimi
2,5 V
Paket Tipi
SOT-23
Yükseklik
0.95mm
Boyutlar
2.98 x 1.91 x 0.95mm
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-40°C
Tipik Manyetik Sensör Histerezisi
5,9 Gs
Ürün Ayrıntıları
A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.
Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.
Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.
Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.