Teknik Belgeler
Özellikler
Güç Beslemesi Tipi
İkili
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Çıkış Tipi
CMOS
Montaj Tipi
Yüzeye Monte
Pim Sayısı
28
Tipik Değişim Hızı
10V/µs
Marka
Analog DevicesBoyutlar
11.58 x 11.58 x 3.94mm
Tipik Çift Besleme Gerilimi
±15V
Yükseklik
3.94mm
Uzunluk
11.58mm
Genişlik
11.58mm
Paket Tipi
PLCC
Menşe
Ireland
Ürün Ayrıntıları
dsPIC Starter Kit
The MPLAB Starter Kit for dsPIC Digital Signal Controllers connects directly to the USB port on a PC. The USB connection supplies both communications and power to the board. The starter kit includes debug and programmer circuitry that allows applications to be programmed onto the boards dsPIC33 device and then debugged, all using MPLAB IDE. Audio input signals from an external microphone or audio equipment are routed to the ADC module in the on-board dsPIC33 device for software processing. Alternatively, applications can use the audio codec for converting the audio signal. Output signals can be generated by the dsPIC33 devices Output Compare module as a pulse-width modulated (PWM) digital waveform. This PWM signal is converted to an analogue signal by a low-pass filter on the starter kit board. Alternatively, applications can output audio data using the audio codec. The output audio signal is then amplified using a headphone amplifier circuit for playback on an output device.
Supplied with
USB cable, CD containing MPLAB IDE, MPLAB C Compiler for dsPIC DSCs, application notes and sample programs.
dsPIC® Development Tools
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Güç Beslemesi Tipi
İkili
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Çıkış Tipi
CMOS
Montaj Tipi
Yüzeye Monte
Pim Sayısı
28
Tipik Değişim Hızı
10V/µs
Marka
Analog DevicesBoyutlar
11.58 x 11.58 x 3.94mm
Tipik Çift Besleme Gerilimi
±15V
Yükseklik
3.94mm
Uzunluk
11.58mm
Genişlik
11.58mm
Paket Tipi
PLCC
Menşe
Ireland
Ürün Ayrıntıları
dsPIC Starter Kit
The MPLAB Starter Kit for dsPIC Digital Signal Controllers connects directly to the USB port on a PC. The USB connection supplies both communications and power to the board. The starter kit includes debug and programmer circuitry that allows applications to be programmed onto the boards dsPIC33 device and then debugged, all using MPLAB IDE. Audio input signals from an external microphone or audio equipment are routed to the ADC module in the on-board dsPIC33 device for software processing. Alternatively, applications can use the audio codec for converting the audio signal. Output signals can be generated by the dsPIC33 devices Output Compare module as a pulse-width modulated (PWM) digital waveform. This PWM signal is converted to an analogue signal by a low-pass filter on the starter kit board. Alternatively, applications can output audio data using the audio codec. The output audio signal is then amplified using a headphone amplifier circuit for playback on an output device.
Supplied with
USB cable, CD containing MPLAB IDE, MPLAB C Compiler for dsPIC DSCs, application notes and sample programs.