3 deck red LED sensor terminal,type3
Teknik Belgeler
Özellikler
Marka
EntrelecRenk
Gri
Seviyelerin Sayısı
Üçlü
Seri
SNA
Sonlandırma Yöntemi
Vida
Kablo CSA
2.5mm²
Gerilim Değeri
380 V ac
Akım Değeri
22A
Hatve
6mm
Minimum Çalışma Sıcaklığı
-5°C
Maksimum Çalışma Sıcaklığı
+40°C
Menşe
France
Ürün Ayrıntıları
Triple Deck and Sensor
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
350,996 TL
Each (In a Pack of 5) (KDV Hariç)
421,195 TL
Each (In a Pack of 5) KDV Dahil
5
350,996 TL
Each (In a Pack of 5) (KDV Hariç)
421,195 TL
Each (In a Pack of 5) KDV Dahil
5
Toptan Satın Al
| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 5 - 25 | 350,996 TL | 1.754,98 TL |
| 30 - 55 | 333,465 TL | 1.667,32 TL |
| 60+ | 319,365 TL | 1.596,82 TL |
Teknik Belgeler
Özellikler
Marka
EntrelecRenk
Gri
Seviyelerin Sayısı
Üçlü
Seri
SNA
Sonlandırma Yöntemi
Vida
Kablo CSA
2.5mm²
Gerilim Değeri
380 V ac
Akım Değeri
22A
Hatve
6mm
Minimum Çalışma Sıcaklığı
-5°C
Maksimum Çalışma Sıcaklığı
+40°C
Menşe
France
Ürün Ayrıntıları
Triple Deck and Sensor
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.