Lapp 3 Damarlı Ekranlı CY Kontrol Kablosu, 0,75 mm² Kesitli, PVC Kılıflı, 18 AWG
Teknik Belgeler
Özellikler
Marka
LappSeri
ÖLFLEX CLASSIC 115 CY
Mihverlerin Sayısı
3
Kesit Alanı
0.75 mm²
Amerikan Tel Ölçüsü
18 AWG
İletken Malzemesi
Bakır
Kılıf Rengi
Gri
Kılıf Malzemesi
Polivinil Klorür PVC
Kontrol Kablosu Tipi
CY
Ekran Tipi
Kalaylı Bakır Örgü
Ekranlanmış/Ekranlanmamış
Ekranlı
Uzunluk
100m
Dış Çap
6.5mm
Minimum Bükme Yarıçapı
Sabit - 6 x D Çok Az Bükülebilir - 20 x D
Gerilim Değeri
300/500 V
Akım Değeri
12 A
Karşılanan Standartlar
EN 50525-2-51
CPR Certification
Eca
Maksimum Çalışma Sıcaklığı
+80°C
Yangın Davranışı
Alev Geciktirici
Minimum Çalışma Sıcaklığı
-40°C
Yağa Dayanıklı
Yes
Kablo Şekli
Bükümlü
Toprak Kablosu
Yes
İletken Direnci
Ω13,7 /km
Yalıtım Malzemesi
PVC
Dolgu Malzemesi
Fitilsiz Dolgu
Çekirdek Telleri
24/0,2 mm
Menşe
Germany
Ürün Ayrıntıları
Ölflex® Classic 115 CY
From Lapp, this Olflex Classic 115 CY control cable is shielded for EMC compliance. The cable is thin, light and flexible, making it suitable for a variety of applications.
As well as being resistant to interference signals, the cable also has oil and chemical resistance, meaning it is ideal for use in challenging industrial environments.
The Olflex Classic 115 CY comprises of fine-wire copper strands, with a PVC insulation and sheath that is flame retardant. It also features a small diameter for installations where space saving is a concern.
Features and Benefits
• Tough and flexible and resistant to most oils and chemicals
• Space saving design
• Covered in an insulating foil
• Outer sheathing made from special PVC-based compound
• Flame-retardant to IEC 60332-1-2
• Low transfer impedance
Applications
This Olflex Classic cable is highly versatile, with resistances that make it ideal for use in;
• Industrial Machines
• Rail vehicles
• HVAC systems
Accessories
Lapp Olflex Classic cable should only be used with accessories that meet its capabilities, and as such provide a series of cable glands that are EMC compliant.
• 560-701 is an M25 Skintop Cable Gland with EMC Brush
• 560-713 is an M32 Skintop Cable Gland with EMC Brush
• 560-694 is an M40 Skintop Cable Gland with EMC Brush
Standards
This cable confirms to ECD 73/23/EEC (low voltage directive).
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
LappSeri
ÖLFLEX CLASSIC 115 CY
Mihverlerin Sayısı
3
Kesit Alanı
0.75 mm²
Amerikan Tel Ölçüsü
18 AWG
İletken Malzemesi
Bakır
Kılıf Rengi
Gri
Kılıf Malzemesi
Polivinil Klorür PVC
Kontrol Kablosu Tipi
CY
Ekran Tipi
Kalaylı Bakır Örgü
Ekranlanmış/Ekranlanmamış
Ekranlı
Uzunluk
100m
Dış Çap
6.5mm
Minimum Bükme Yarıçapı
Sabit - 6 x D Çok Az Bükülebilir - 20 x D
Gerilim Değeri
300/500 V
Akım Değeri
12 A
Karşılanan Standartlar
EN 50525-2-51
CPR Certification
Eca
Maksimum Çalışma Sıcaklığı
+80°C
Yangın Davranışı
Alev Geciktirici
Minimum Çalışma Sıcaklığı
-40°C
Yağa Dayanıklı
Yes
Kablo Şekli
Bükümlü
Toprak Kablosu
Yes
İletken Direnci
Ω13,7 /km
Yalıtım Malzemesi
PVC
Dolgu Malzemesi
Fitilsiz Dolgu
Çekirdek Telleri
24/0,2 mm
Menşe
Germany
Ürün Ayrıntıları
Ölflex® Classic 115 CY
From Lapp, this Olflex Classic 115 CY control cable is shielded for EMC compliance. The cable is thin, light and flexible, making it suitable for a variety of applications.
As well as being resistant to interference signals, the cable also has oil and chemical resistance, meaning it is ideal for use in challenging industrial environments.
The Olflex Classic 115 CY comprises of fine-wire copper strands, with a PVC insulation and sheath that is flame retardant. It also features a small diameter for installations where space saving is a concern.
Features and Benefits
• Tough and flexible and resistant to most oils and chemicals
• Space saving design
• Covered in an insulating foil
• Outer sheathing made from special PVC-based compound
• Flame-retardant to IEC 60332-1-2
• Low transfer impedance
Applications
This Olflex Classic cable is highly versatile, with resistances that make it ideal for use in;
• Industrial Machines
• Rail vehicles
• HVAC systems
Accessories
Lapp Olflex Classic cable should only be used with accessories that meet its capabilities, and as such provide a series of cable glands that are EMC compliant.
• 560-701 is an M25 Skintop Cable Gland with EMC Brush
• 560-713 is an M32 Skintop Cable Gland with EMC Brush
• 560-694 is an M40 Skintop Cable Gland with EMC Brush
Standards
This cable confirms to ECD 73/23/EEC (low voltage directive).