Teknik Belgeler
Özellikler
Marka
LappDiş Boyutu
M12
Malzeme
Nikel Kaplamalı Pirinç
Fiş Tipi
Karartma
Çap
17.8mm
Dişli/Dişsiz
Dişli
Tehlikeli Alan Sertifikası
ATEX
IP Değeri
IP68
Seri
5210
Maksimum Çalışma Sıcaklığı
+90°C
Şununla Birlikte Kullanım İçin
Cable Screw Gland
Minimum Çalışma Sıcaklığı
-30°C
Karşılanan Standartlar
IEC
Menşe
Germany
Ürün Ayrıntıları
Skintop ATEX (Ex) Nickel Plated Brass Blanking Plugs - Metric
From Lapp, Skindicht BL-M ATEX blanking plug is used to close over pre-drilled threaded bore holes. If a cable opening in a panel, junction box or machine housing has become redundant, these blanking plugs can be used to seal the bore hole thread in accordance with EN 50262.
Complete with an o-ring, and with a robust nickel plated brass construction, these blind plugs have an excellent degree of environmental and mechanical impact protection. Not only that but they are ATEX approved, which means they are designed for use in environments where there is a risk of explosion.
Features and Benefits
APEX Approved
Cold Impact Resistance
Corrosion Resistance
Temaperature Resistance
Robust Construction
IP68 Protection to 5 Bar
Operating Temperature Range -30°C to +90°C
Metric Sizes
Applications
These blind plugs are ATEX approved to Equipment Group II / Category 2G+1D, and are often used in the following applications:
Offshore and Marine Industries
Chemical and Petrochemical Industries
Construction
Environment
These blind plugs provide protection up to IP68, which means they have excellent protection against dust and particle ingress, and are watertight even in submersion up to 10 bars of pressure. This means they are suitable for use in harsh indoor environments, and for most outdoor applications.
Accessories
Lapp provide a handy cable gland wrench set to assist in cable gland removal.
458-3947 is a Spanner set for M12, M16, M20, M32 and M40 glands
Standards
EN50262
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
LappDiş Boyutu
M12
Malzeme
Nikel Kaplamalı Pirinç
Fiş Tipi
Karartma
Çap
17.8mm
Dişli/Dişsiz
Dişli
Tehlikeli Alan Sertifikası
ATEX
IP Değeri
IP68
Seri
5210
Maksimum Çalışma Sıcaklığı
+90°C
Şununla Birlikte Kullanım İçin
Cable Screw Gland
Minimum Çalışma Sıcaklığı
-30°C
Karşılanan Standartlar
IEC
Menşe
Germany
Ürün Ayrıntıları
Skintop ATEX (Ex) Nickel Plated Brass Blanking Plugs - Metric
From Lapp, Skindicht BL-M ATEX blanking plug is used to close over pre-drilled threaded bore holes. If a cable opening in a panel, junction box or machine housing has become redundant, these blanking plugs can be used to seal the bore hole thread in accordance with EN 50262.
Complete with an o-ring, and with a robust nickel plated brass construction, these blind plugs have an excellent degree of environmental and mechanical impact protection. Not only that but they are ATEX approved, which means they are designed for use in environments where there is a risk of explosion.
Features and Benefits
APEX Approved
Cold Impact Resistance
Corrosion Resistance
Temaperature Resistance
Robust Construction
IP68 Protection to 5 Bar
Operating Temperature Range -30°C to +90°C
Metric Sizes
Applications
These blind plugs are ATEX approved to Equipment Group II / Category 2G+1D, and are often used in the following applications:
Offshore and Marine Industries
Chemical and Petrochemical Industries
Construction
Environment
These blind plugs provide protection up to IP68, which means they have excellent protection against dust and particle ingress, and are watertight even in submersion up to 10 bars of pressure. This means they are suitable for use in harsh indoor environments, and for most outdoor applications.
Accessories
Lapp provide a handy cable gland wrench set to assist in cable gland removal.
458-3947 is a Spanner set for M12, M16, M20, M32 and M40 glands
Standards
EN50262