Teknik Belgeler
Özellikler
Marka
LegrisKonnektör A
İterek Sokma 16 mm
Konnektör B
İterek Sokma 16 mm
Pnömatik Bağlantı Elemanı Tipi
Tee Dişli Adaptör
Bağlantı Stili
Dişli - Boru
Dişli Bağlantı
R 3/8 Erkek
Üretici Serisi
LF3000
Dişli Malzemesi
Pirinç
Maksimum Çalışma Basıncı
20 bar
Gövde Malzemesi
Plastik
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
+80°C
Bitirme
Nikel Kaplamalı
Karşılanan Standartlar
EC/42/2006
Menşe
France
Ürün Ayrıntıları
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
7.045,26 TL
1.409,052 TL Each (In a Pack of 5) (KDV Hariç)
8.454,31 TL
1.690,862 TL Each (In a Pack of 5) KDV Dahil
5
7.045,26 TL
1.409,052 TL Each (In a Pack of 5) (KDV Hariç)
8.454,31 TL
1.690,862 TL Each (In a Pack of 5) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
5
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
LegrisKonnektör A
İterek Sokma 16 mm
Konnektör B
İterek Sokma 16 mm
Pnömatik Bağlantı Elemanı Tipi
Tee Dişli Adaptör
Bağlantı Stili
Dişli - Boru
Dişli Bağlantı
R 3/8 Erkek
Üretici Serisi
LF3000
Dişli Malzemesi
Pirinç
Maksimum Çalışma Basıncı
20 bar
Gövde Malzemesi
Plastik
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
+80°C
Bitirme
Nikel Kaplamalı
Karşılanan Standartlar
EC/42/2006
Menşe
France
Ürün Ayrıntıları
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.