Teknik Belgeler
Özellikler
Marka
MartindaleTest Akımı Değeri
2mA
Çıkış Gerilimi
240V dc
Pil Tipi
9 V
Güç Kaynağı
Batarya
Boyutlar
144 x 63 x 31mm
Ağırlık
180g
Yükseklik
31mm
Uzunluk
144mm
Maksimum Çalışma Sıcaklığı
+40°C
Minimum Çalışma Sıcaklığı
-10°C
Model Number p
PD240
Model Numarası (p)
PD240
Genişlik
63mm
Menşe
Philippines
Ürün Ayrıntıları
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001
Martindale Lock-Off Kits, Voltage Indicators and Proving Units
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
MartindaleTest Akımı Değeri
2mA
Çıkış Gerilimi
240V dc
Pil Tipi
9 V
Güç Kaynağı
Batarya
Boyutlar
144 x 63 x 31mm
Ağırlık
180g
Yükseklik
31mm
Uzunluk
144mm
Maksimum Çalışma Sıcaklığı
+40°C
Minimum Çalışma Sıcaklığı
-10°C
Model Number p
PD240
Model Numarası (p)
PD240
Genişlik
63mm
Menşe
Philippines
Ürün Ayrıntıları
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001