Teknik Belgeler
Özellikler
Marka
MennekesAkım Değeri
32A
Fiş/Priz
Fiş
Kutup Biçimi
4P
Gerilim Değeri
400 V
Montaj Tipi
Duvara Monte
Cinsiyet
Erkek
Gövde Yönü
25°
Sonlandırma Yöntemi
Vidalı Klemens
IP Değeri
IP44
Renk
Kırmızı
Kablo CSA
2.5 → 6mm²
Maksimum Çalışma Sıcaklığı
+55°C
Minimum Çalışma Sıcaklığı
-25°C
Düşük Gerilim
No
Menşe
Germany
Ürün Ayrıntıları
Appliance Inlets - Wall Mounted
These angled wall mounted inlets are provided with metric conduit entries at the top and bottom. Splashproof versions only have one M20 entry at the top and have sprung covers for enhanced ingress protection when not in use.,Products are type tested to VDE.
Mennekes Appliance Inlets
Appliance inlets conforming to the latest requirements of British and European standards. The insulator outer casing and interiors are manufactured from Amaplast (nylon 6) for excellent mechanical performance from -25°C → +55°C (ambient temperature). This material provides good electrical insulation and will meet the requirements of most industrial environments.,Contact tubes and pins are made of brass. To prevent incorrect connection, the earth contact is in a different position, relative to the safety key way on each socket outlet, for each voltage. All types are colour coded by voltage and are suitable for 50 / 60Hz operation.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
MennekesAkım Değeri
32A
Fiş/Priz
Fiş
Kutup Biçimi
4P
Gerilim Değeri
400 V
Montaj Tipi
Duvara Monte
Cinsiyet
Erkek
Gövde Yönü
25°
Sonlandırma Yöntemi
Vidalı Klemens
IP Değeri
IP44
Renk
Kırmızı
Kablo CSA
2.5 → 6mm²
Maksimum Çalışma Sıcaklığı
+55°C
Minimum Çalışma Sıcaklığı
-25°C
Düşük Gerilim
No
Menşe
Germany
Ürün Ayrıntıları
Appliance Inlets - Wall Mounted
These angled wall mounted inlets are provided with metric conduit entries at the top and bottom. Splashproof versions only have one M20 entry at the top and have sprung covers for enhanced ingress protection when not in use.,Products are type tested to VDE.
Mennekes Appliance Inlets
Appliance inlets conforming to the latest requirements of British and European standards. The insulator outer casing and interiors are manufactured from Amaplast (nylon 6) for excellent mechanical performance from -25°C → +55°C (ambient temperature). This material provides good electrical insulation and will meet the requirements of most industrial environments.,Contact tubes and pins are made of brass. To prevent incorrect connection, the earth contact is in a different position, relative to the safety key way on each socket outlet, for each voltage. All types are colour coded by voltage and are suitable for 50 / 60Hz operation.