Teknik Belgeler
Özellikler
Arka Aydınlatma
Yes
Bağlantı Noktalarının Sayısı
6
Ekran Rengi
Gri
Ürün Yelpazesi
Sysmac HMI
Maksimum Çalışma Sıcaklığı
+50°C
Ekran Boyutu
7 in
IP Değeri
IP65
Minimum Çalışma Sıcaklığı
0°C
Ekran Tipi
TFT LCD
Bağlantı Noktası Tipi
1 x Seri 1 x USB Yardımcı, 2 x Ethernet, 2 x USB Ana Bilgisayar
Besleme Gerilimi
24 V dc
Derinlik
69mm
Genişlik
236mm
Uzunluk
165mm
Marka
OmronPartial Bearing Code
51305
Boyutlar
236 x 165 x 69 mm
Menşe
Netherlands
Ürün Ayrıntıları
Immersion Cartridge Heaters
This design of heater allows the stainless steel sheath to be immersed directly in to semi solids or liquids up to the thread mounting bush. The heater is constructed from 316 Stainless steel which has a welded end cap and threaded, tapered, mounting bush.
Warning
For safety reasons, it is recommended that the heater block/body is bonded to earth.The heater must not be immersed in to any liquid above the mounting bush as the flying lead termination is not sealed.
Approvals
UL & CSA
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Arka Aydınlatma
Yes
Bağlantı Noktalarının Sayısı
6
Ekran Rengi
Gri
Ürün Yelpazesi
Sysmac HMI
Maksimum Çalışma Sıcaklığı
+50°C
Ekran Boyutu
7 in
IP Değeri
IP65
Minimum Çalışma Sıcaklığı
0°C
Ekran Tipi
TFT LCD
Bağlantı Noktası Tipi
1 x Seri 1 x USB Yardımcı, 2 x Ethernet, 2 x USB Ana Bilgisayar
Besleme Gerilimi
24 V dc
Derinlik
69mm
Genişlik
236mm
Uzunluk
165mm
Marka
OmronPartial Bearing Code
51305
Boyutlar
236 x 165 x 69 mm
Menşe
Netherlands
Ürün Ayrıntıları
Immersion Cartridge Heaters
This design of heater allows the stainless steel sheath to be immersed directly in to semi solids or liquids up to the thread mounting bush. The heater is constructed from 316 Stainless steel which has a welded end cap and threaded, tapered, mounting bush.
Warning
For safety reasons, it is recommended that the heater block/body is bonded to earth.The heater must not be immersed in to any liquid above the mounting bush as the flying lead termination is not sealed.
Approvals
UL & CSA
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.