Parker Hidrolik Dişli Pompası, 8cm³
Teknik Belgeler
Özellikler
Marka
ParkerHacim
8cm³
Maksimum Çalışma Basıncı
250 bar
Minimum Dönme Hızı
500rpm
Üretici Serisi
PGP511
Dönüş Yönü
Saat Yönüne
Maksimum Dönme Hızı
2500rpm
Gövde Boyutları
130.7 x 89.5 x 114mm
Gövde Yüksekliği
114mm
Gövde Uzunluğu
130.7mm
Gövde Genişliği
89.5mm
Menşe
Czech Republic
Ürün Ayrıntıları
Fixed Displacement Gear Pump, 1:8 Tapered Shaft
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.
Gear Pumps
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
13.867,35 TL
Each (KDV Hariç)
16.640,82 TL
Each KDV Dahil
1
13.867,35 TL
Each (KDV Hariç)
16.640,82 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
ParkerHacim
8cm³
Maksimum Çalışma Basıncı
250 bar
Minimum Dönme Hızı
500rpm
Üretici Serisi
PGP511
Dönüş Yönü
Saat Yönüne
Maksimum Dönme Hızı
2500rpm
Gövde Boyutları
130.7 x 89.5 x 114mm
Gövde Yüksekliği
114mm
Gövde Uzunluğu
130.7mm
Gövde Genişliği
89.5mm
Menşe
Czech Republic
Ürün Ayrıntıları
Fixed Displacement Gear Pump, 1:8 Tapered Shaft
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.
Gear Pumps
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.