Teknik Belgeler
Özellikler
Marka
ParkerKonnektör A
G 1/2 Erkek
Konnektör A - Diş Boyutu
1/2inç
Hidrolik Bağlantı Elemanı Tipi
Hidrolik Düz Dişli Redüktör
Konnektör B
G 3/4 Dişi
Konnektör B - Diş Boyutu
3/4inç
Malzeme
Çelik
Bitirme
Çinko Kaplamalı
Konnektör A - Diş Standardı
G
Konnektör A - Cinsiyet
Erkek
Konnektör B - Cinsiyet
Dişi
Konnektör B - Diş Standardı
G
Maksimum Çalışma Basıncı
315 bar
Minimum Çalışma Sıcaklığı
-30°C
Maksimum Çalışma Sıcaklığı
+100°C
Ürün Ayrıntıları
BSP Reducers
Reducing thread adaptors with male (Rs) BSP parallel thread to female (Rp) BSP parallel thread. Male thread is sealed at the port connection with a nitrile rubber seal. Operating temperature range without pressure reductions is -30 to +100°C. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). The 60° female cone makes these adaptors an ideal port fitting for use with our range of BSP reusable fittings and crimped hose assemblies.
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
2
P.O.A.
2
Teknik Belgeler
Özellikler
Marka
ParkerKonnektör A
G 1/2 Erkek
Konnektör A - Diş Boyutu
1/2inç
Hidrolik Bağlantı Elemanı Tipi
Hidrolik Düz Dişli Redüktör
Konnektör B
G 3/4 Dişi
Konnektör B - Diş Boyutu
3/4inç
Malzeme
Çelik
Bitirme
Çinko Kaplamalı
Konnektör A - Diş Standardı
G
Konnektör A - Cinsiyet
Erkek
Konnektör B - Cinsiyet
Dişi
Konnektör B - Diş Standardı
G
Maksimum Çalışma Basıncı
315 bar
Minimum Çalışma Sıcaklığı
-30°C
Maksimum Çalışma Sıcaklığı
+100°C
Ürün Ayrıntıları
BSP Reducers
Reducing thread adaptors with male (Rs) BSP parallel thread to female (Rp) BSP parallel thread. Male thread is sealed at the port connection with a nitrile rubber seal. Operating temperature range without pressure reductions is -30 to +100°C. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). The 60° female cone makes these adaptors an ideal port fitting for use with our range of BSP reusable fittings and crimped hose assemblies.
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.