P.M.A STB 55 Temperature Limiter, 100 x 50mm Relay, 230 V ac Supply Voltage ON/OFF
Teknik Belgeler
Özellikler
Marka
P.M.AÇıkış Tipi
Relay
Besleme Gerilimi
230 V ac
Boyut
100 x 50mm
Minimum Çalışma Sıcaklığı
-10°C
Maksimum Çalışma Sıcaklığı
+55°C
Sıcaklık Aralığı
-100 → +600 °C
Kontrol Tipi
AÇIK/KAPALI
IP Değeri
IP20
Ek İşlevsellik
ON/OFF
Seri
STB 55
Panel Derinliği
110mm
Menşe
Germany
Ürün Ayrıntıları
PMA STB 55 Temperature Limiter
The safety temperature limiter STB 55 is used wherever thermal processes need to be monitored, and the plant switched into a safe condition in case of a fault.
If the permissible temperature limit is reached or if a fault occurs in the monitoring equipment within the permissible temperature range (sensor break or short circuit, failure of a component within the device, fault in the software, failure or impermissible value of the supply voltage, etc.) the STB 55 switches off immediately. The alarm contact is activated, the “ALARM” LED in the front panel and the background lighting of the display light up, and the cause of the alarm appears in the display in plain text. In addition, a 24 VDC signal for external alarm signalling is available.
PMA Temperature Controllers
40.523,45 TL
40.523,45 TL Each (KDV Hariç)
48.628,14 TL
48.628,14 TL Each KDV Dahil
1
40.523,45 TL
40.523,45 TL Each (KDV Hariç)
48.628,14 TL
48.628,14 TL Each KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
P.M.AÇıkış Tipi
Relay
Besleme Gerilimi
230 V ac
Boyut
100 x 50mm
Minimum Çalışma Sıcaklığı
-10°C
Maksimum Çalışma Sıcaklığı
+55°C
Sıcaklık Aralığı
-100 → +600 °C
Kontrol Tipi
AÇIK/KAPALI
IP Değeri
IP20
Ek İşlevsellik
ON/OFF
Seri
STB 55
Panel Derinliği
110mm
Menşe
Germany
Ürün Ayrıntıları
PMA STB 55 Temperature Limiter
The safety temperature limiter STB 55 is used wherever thermal processes need to be monitored, and the plant switched into a safe condition in case of a fault.
If the permissible temperature limit is reached or if a fault occurs in the monitoring equipment within the permissible temperature range (sensor break or short circuit, failure of a component within the device, fault in the software, failure or impermissible value of the supply voltage, etc.) the STB 55 switches off immediately. The alarm contact is activated, the “ALARM” LED in the front panel and the background lighting of the display light up, and the cause of the alarm appears in the display in plain text. In addition, a 24 VDC signal for external alarm signalling is available.
PMA Temperature Controllers