RS PRO DC Elektronik Yük, 0,016 Ω → 5 kΩ
Teknik Belgeler
Özellikler
Marka
RS ProYük Tipi
Programmable
Sabit Gerilim Modu Aralığı
1 150 V
Sabit Akım Modu Aralığı
0 → 60 A
Sabit Direnç Modu Aralığı
0.016 Ω → 5 kΩ
Sabit Vat Miktarı Modu Aralığı
3 → 300 W
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
RS PRO PEL-3031E Programmable Single Output DC Electronic Load
RS PRO PEL-3031E is a programmable single-channel electronic load providing 300 W (1 V to 150 V / 60 A) current sink capabilities. It has seven operating modes, selected on the basis of product test requirements. Different test conditions are met by the Static function (to sink a constant current), the Dynamic function (to periodically switch between two sink conditions) and the Sequence function (to provide tests for more than two sink conditions).
The Sequence function can be divided into Normal Sequence and Fast Sequence. Setting parameters for multiple steps can simulate consecutive current changes of real load conditions. A special feature of the RS PRO PEL-3031E is its Soft Start function which enables determination of the rise time of current sink, to decide the required time to reach a set current, resistance or power value. Test adaptability is enhanced by the Timer function (Count Time and Cut Off Time).
Supplied with
User manual CD-ROM, programming manual, quick start guide, power cord, front terminal washers (x2), remote sense cables (red x1, black x1)
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
RS ProYük Tipi
Programmable
Sabit Gerilim Modu Aralığı
1 150 V
Sabit Akım Modu Aralığı
0 → 60 A
Sabit Direnç Modu Aralığı
0.016 Ω → 5 kΩ
Sabit Vat Miktarı Modu Aralığı
3 → 300 W
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
RS PRO PEL-3031E Programmable Single Output DC Electronic Load
RS PRO PEL-3031E is a programmable single-channel electronic load providing 300 W (1 V to 150 V / 60 A) current sink capabilities. It has seven operating modes, selected on the basis of product test requirements. Different test conditions are met by the Static function (to sink a constant current), the Dynamic function (to periodically switch between two sink conditions) and the Sequence function (to provide tests for more than two sink conditions).
The Sequence function can be divided into Normal Sequence and Fast Sequence. Setting parameters for multiple steps can simulate consecutive current changes of real load conditions. A special feature of the RS PRO PEL-3031E is its Soft Start function which enables determination of the rise time of current sink, to decide the required time to reach a set current, resistance or power value. Test adaptability is enhanced by the Timer function (Count Time and Cut Off Time).
Supplied with
User manual CD-ROM, programming manual, quick start guide, power cord, front terminal washers (x2), remote sense cables (red x1, black x1)