Flaşör, Xenon, Yeşil, Yanıp Sönen, Esnek DIN, 10 → 30 V dc
Teknik Belgeler
Özellikler
Marka
RS ProBesleme Gerilimi
10 → 30 V dc
Işık Etkisi
Yanıp Sönen
Mercek Rengi
Yeşil
Montaj Stili
Flexi DIN Montaj
Ampul Tipi
Zenon
Akım Tüketimi
150 mA, 175 mA
Akım Tipi
DC
Taban Çapı
108mm
Muhafaza Rengi
Siyah
Lamba Dahil
Yes
Yükseklik
223mm
IP Değeri
IP56
Minimum Sıcaklık
-30°C
Karşılanan Standartlar
EMC (ECE R10), RoHS Uyumlu
Maksimum Sıcaklık
+50°C
Diğer Özellikler
Düşük Profil ve Kompakt Tasarım
Menşe
United Kingdom
Ürün Ayrıntıları
RS PRO Xenon Beacons
These Xenon Beacons from our own RS PRO brand are high quality flashing beacons ideal for use in wide range of applications requiring a low cost and energy efficient signalling solution. The snap fit design of the mounting plates allows you to install the xenon beacons with ease, with one plate being attached to the beacon and the other to the surface. This range of flashing beacons from RS PRO are suitable for light and heavy industrial signalling applications, producing a powerful flashing light source to signal hazards and emergencies.
Supplied with
Lens and bulb
Warning
Disconnect and leave for 5 minutes before touching.
Approvals
EMC - meets the requirements for on and off-road applications covered by directives 95/54 and 89/336.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
1.701,40 TL
Each (KDV Hariç)
2.041,68 TL
Each KDV Dahil
1
1.701,40 TL
Each (KDV Hariç)
2.041,68 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
RS ProBesleme Gerilimi
10 → 30 V dc
Işık Etkisi
Yanıp Sönen
Mercek Rengi
Yeşil
Montaj Stili
Flexi DIN Montaj
Ampul Tipi
Zenon
Akım Tüketimi
150 mA, 175 mA
Akım Tipi
DC
Taban Çapı
108mm
Muhafaza Rengi
Siyah
Lamba Dahil
Yes
Yükseklik
223mm
IP Değeri
IP56
Minimum Sıcaklık
-30°C
Karşılanan Standartlar
EMC (ECE R10), RoHS Uyumlu
Maksimum Sıcaklık
+50°C
Diğer Özellikler
Düşük Profil ve Kompakt Tasarım
Menşe
United Kingdom
Ürün Ayrıntıları
RS PRO Xenon Beacons
These Xenon Beacons from our own RS PRO brand are high quality flashing beacons ideal for use in wide range of applications requiring a low cost and energy efficient signalling solution. The snap fit design of the mounting plates allows you to install the xenon beacons with ease, with one plate being attached to the beacon and the other to the surface. This range of flashing beacons from RS PRO are suitable for light and heavy industrial signalling applications, producing a powerful flashing light source to signal hazards and emergencies.
Supplied with
Lens and bulb
Warning
Disconnect and leave for 5 minutes before touching.
Approvals
EMC - meets the requirements for on and off-road applications covered by directives 95/54 and 89/336.