Teknik Belgeler
Özellikler
Marka
Sensata / CrydomKutupların Sayısı
3
Kontak Gerilim Değeri
30 V dc
Kontak Akımı Değeri
32 mA
Seri
DRC
İşlev
Motor Kontrolü
Normal Durum Yapılandırması
3NO
Terminal Tipi
Vida
Uzunluk
45.31mm
Genişlik
86.71mm
Derinlik
96.02mm
Yük Gerilimi
48 V ac → 400V ac
Minimum Çalışma Sıcaklığı
-30°C
Giriş Akımı
6.1 mA → 8mA
Yük Akımı
7.6A
Montaj Stili
DIN Rayına Monte
Kontrol Gerilimi
208 V ac → 265 V ac
Maksimum Çalışma Sıcaklığı
+80°C
Kutup ve Atım Yapılandırması
3P
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
Sensata / CrydomKutupların Sayısı
3
Kontak Gerilim Değeri
30 V dc
Kontak Akımı Değeri
32 mA
Seri
DRC
İşlev
Motor Kontrolü
Normal Durum Yapılandırması
3NO
Terminal Tipi
Vida
Uzunluk
45.31mm
Genişlik
86.71mm
Derinlik
96.02mm
Yük Gerilimi
48 V ac → 400V ac
Minimum Çalışma Sıcaklığı
-30°C
Giriş Akımı
6.1 mA → 8mA
Yük Akımı
7.6A
Montaj Stili
DIN Rayına Monte
Kontrol Gerilimi
208 V ac → 265 V ac
Maksimum Çalışma Sıcaklığı
+80°C
Kutup ve Atım Yapılandırması
3P
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.