Yarı İletken Kontaktörü 480V, 7,6A 3 Kutuplu, Ters
Teknik Belgeler
Özellikler
Marka
Sensata / CrydomMaksimum Yük Akımı
7.6 A
Montaj Tipi
DIN Rayı
Kontrol Gerilim Aralığı
90 V ac → 140 V ac
Kutupların Sayısı
3
Terminal Tipi
Vida
Yük Gerilimi Aralığı
48 V ac → 510V ac
Yükseklik
86.71mm
Uzunluk
45.31mm
Minimum Çalışma Sıcaklığı
-30°C
Maksimum Çalışma Sıcaklığı
+80°C
Derinlik
96.02mm
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
Sensata / CrydomMaksimum Yük Akımı
7.6 A
Montaj Tipi
DIN Rayı
Kontrol Gerilim Aralığı
90 V ac → 140 V ac
Kutupların Sayısı
3
Terminal Tipi
Vida
Yük Gerilimi Aralığı
48 V ac → 510V ac
Yükseklik
86.71mm
Uzunluk
45.31mm
Minimum Çalışma Sıcaklığı
-30°C
Maksimum Çalışma Sıcaklığı
+80°C
Derinlik
96.02mm
Menşe
Mexico
Ürün Ayrıntıları
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors