TE Connectivity Straight, Modified Polyolefin, 43mm
Teknik Belgeler
Özellikler
Marka
TE ConnectivityTip
Düz Kablo Kılıfı
Inside Diameter Primary
43mm
Inside Diameter Secondary
43mm
Yapışkan Astarlı Parça
No
Malzeme
Değiştirilmiş Poliolefin
Kablo Uçlarının Sayısı
1
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+135°C
Shrunk Diameter Primary
28.2mm
Shrunk Diameter Secondary
9.9mm
Seri
202K1
Ürün Ayrıntıları
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
Teklif İsteyiniz
Standart
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
Standart
1
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
TE ConnectivityTip
Düz Kablo Kılıfı
Inside Diameter Primary
43mm
Inside Diameter Secondary
43mm
Yapışkan Astarlı Parça
No
Malzeme
Değiştirilmiş Poliolefin
Kablo Uçlarının Sayısı
1
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+135°C
Shrunk Diameter Primary
28.2mm
Shrunk Diameter Secondary
9.9mm
Seri
202K1
Ürün Ayrıntıları
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.