TE Connectivity DuraSeal Serisi Kurşun Tip Kablo Ucu, Kırmızı, Çap: 4mm, Dişi, İzoleli, 0,5mm² - 1mm², 22AWG
Teknik Belgeler
Özellikler
Marka
TE ConnectivitySeri
DuraSeal
Yalıtım
Yalıtımlı
Yalıtım Malzemesi
Naylon
Toplam Uzunluk
30mm
Cinsiyet
Dişi
Minimum Wire Size mm²
0.5mm²
Maximum Wire Size mm²
1mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Mermi Çapı
4mm
Renk
Kırmızı
Kontak Kaplaması
Kalay
Kontak Malzemesi
Bakır Alaşım
Menşe
Mexico
Ürün Ayrıntıları
Duraseal - Bullet Terminal
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
TE ConnectivitySeri
DuraSeal
Yalıtım
Yalıtımlı
Yalıtım Malzemesi
Naylon
Toplam Uzunluk
30mm
Cinsiyet
Dişi
Minimum Wire Size mm²
0.5mm²
Maximum Wire Size mm²
1mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Mermi Çapı
4mm
Renk
Kırmızı
Kontak Kaplaması
Kalay
Kontak Malzemesi
Bakır Alaşım
Menşe
Mexico
Ürün Ayrıntıları
Duraseal - Bullet Terminal
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed