Teknik Belgeler
Özellikler
Marka
TE ConnectivityBirleştirme Tipi
Uç
Tel Boyutu
18 → 16 AWG
Toplam Uzunluk
38.7mm
Yalıtım
Yalıtımlı
Renk
Mavi
Menşe
Mexico
Ürün Ayrıntıları
TE Connectivity Cold Applied In-Line Splices
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Standards
Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12
Splices
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
391,472 TL
Each (In a Bag of 100) KDV Hariç
469,766 TL
Each (In a Bag of 100) KDV Dahil
100
391,472 TL
Each (In a Bag of 100) KDV Hariç
469,766 TL
Each (In a Bag of 100) KDV Dahil
100
Teknik Belgeler
Özellikler
Marka
TE ConnectivityBirleştirme Tipi
Uç
Tel Boyutu
18 → 16 AWG
Toplam Uzunluk
38.7mm
Yalıtım
Yalıtımlı
Renk
Mavi
Menşe
Mexico
Ürün Ayrıntıları
TE Connectivity Cold Applied In-Line Splices
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Standards
Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12