Teknik Belgeler
Özellikler
Marka
TE ConnectivityManşon Çapı
9.5mm
Renk
Siyah
Büzülmüş Çap
3.4mm
Manşon Tipi
Isı Büzüşmeli
Yapışkan Astarlı Parça
No
Büzülme Oranı
3:1
Manşon Uzunluğu
300mm
Malzeme
Poliolefin
Çalışma Sıcaklığı Aralığı
-55 → +110 °C
Alev Geciktirici
No
Halojensiz
No
Seri
SCL
Menşe
Czech Republic
Ürün Ayrıntıları
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
5
Teklif İsteyiniz
5
Teknik Belgeler
Özellikler
Marka
TE ConnectivityManşon Çapı
9.5mm
Renk
Siyah
Büzülmüş Çap
3.4mm
Manşon Tipi
Isı Büzüşmeli
Yapışkan Astarlı Parça
No
Büzülme Oranı
3:1
Manşon Uzunluğu
300mm
Malzeme
Poliolefin
Çalışma Sıcaklığı Aralığı
-55 → +110 °C
Alev Geciktirici
No
Halojensiz
No
Seri
SCL
Menşe
Czech Republic
Ürün Ayrıntıları
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.