Bel Power, 50W SMPS (Anahtarlamalı Güç Kaynağı), 1 Çıkışlı, 2A
Teknik Belgeler
Özellikler
Çıkış Gerilimi
24V dc
Çıkış Akımı
2A
Güç Değeri
50W
Çıkışların Sayısı
1
Giriş Gerilimi
85 → 264 V ac, 88 → 372 V dc
Montaj Tipi
Şasiye Monte
Paket Tipi
Kapalı
Uzunluk
168.5mm
Genişlik
111.2mm
Derinlik
38.7mm
Verimlilik
81%
Minimum Sıcaklık
-25°C
Ağırlık
770g
Maksimum Sıcaklık
+71°C
Ürün Ayrıntıları
50 Watt Single/Dual output, M Series
The M Series of DC-DC and AC-DC converters represents a broad and flexible range of power supplies for use in advanced industrial electronic systems. This Eurocassette power supply Features high efficiency, reliability, low output voltage noise and excellent dynamic response to load/line changes, due to individual regulation of each output. LED indicators display the status of the converter and allow visual monitoring of the system at any time. The case design allows operation at nominal load up to 71°C in a free-air ambient temperature. If forced cooling is provided, the ambient temperature may exceed 71°C, but the case temperature should remain below 95°C under all conditions. A temperature sensor generates an inhibit signal, which disables the outputs, when the case temperature TC exceeds the limit. The outputs automatically recover, when the temperature drops below the limit. The converters may either be plugged into a 19 inch rack system according to IEC 60927-3 or be mounted onto a chassis or a plate.
Standards
EN 60950-1, UL 60950-1
Railway EN 50155, EN 50121
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Çıkış Gerilimi
24V dc
Çıkış Akımı
2A
Güç Değeri
50W
Çıkışların Sayısı
1
Giriş Gerilimi
85 → 264 V ac, 88 → 372 V dc
Montaj Tipi
Şasiye Monte
Paket Tipi
Kapalı
Uzunluk
168.5mm
Genişlik
111.2mm
Derinlik
38.7mm
Verimlilik
81%
Minimum Sıcaklık
-25°C
Ağırlık
770g
Maksimum Sıcaklık
+71°C
Ürün Ayrıntıları
50 Watt Single/Dual output, M Series
The M Series of DC-DC and AC-DC converters represents a broad and flexible range of power supplies for use in advanced industrial electronic systems. This Eurocassette power supply Features high efficiency, reliability, low output voltage noise and excellent dynamic response to load/line changes, due to individual regulation of each output. LED indicators display the status of the converter and allow visual monitoring of the system at any time. The case design allows operation at nominal load up to 71°C in a free-air ambient temperature. If forced cooling is provided, the ambient temperature may exceed 71°C, but the case temperature should remain below 95°C under all conditions. A temperature sensor generates an inhibit signal, which disables the outputs, when the case temperature TC exceeds the limit. The outputs automatically recover, when the temperature drops below the limit. The converters may either be plugged into a 19 inch rack system according to IEC 60927-3 or be mounted onto a chassis or a plate.
Standards
EN 60950-1, UL 60950-1
Railway EN 50155, EN 50121