Festo Tee Dişli-Boru Adaptör, Polipropilen, R 1/8 Erkek, NPQP Serisi
Teknik Belgeler
Özellikler
Marka
FestoKonnektör A
R 1/8
Konnektör B
İterek Sokma 6 mm
Pnömatik Bağlantı Elemanı Tipi
Dirsek Dişli Adaptörü
Bağlantı Stili
Dişli - Boru
Üretici Serisi
NPQP
Model Number p
133053
Model Numarası (p)
133053
Maksimum Çalışma Basıncı
10 bar
Kimyasal Maddelere Dayanıklı
Yes
Gövde Malzemesi
Polipropilen
Minimum Çalışma Sıcaklığı
-20°C
Gıda Sınıfı
Yes
Maksimum Çalışma Sıcaklığı
+60°C
Karşılanan Standartlar
ANSI/NSF 51, FDA 21 CFR 177.1520, FDA 21 CFR 177.2600, NSF H1 Reg. No. 123961
Konnektör A
R 1/8
Menşe
Japan
Ürün Ayrıntıları
NPQP Thread to Tube Elbow Push in Fittings
Festo NPQP range of push in elbow connectors that are designed to easily connect tubing and provide a reliable seal. Polypropylene fitting for use in applications with extreme media influences. For pneumatic applications with a temperature range up to 60°C and a pressure range up to 10 bar. Featuring high corrosion resistance (CRC3) and chemical resistance. The NPQP range is an alternative to stainless steel fittings for the food and beverage industry, biotechnology/pharmaceuticals, medical technology, clean rooms and process automation.
Optocoupler, Intelligent Power Module (IPM) Interface, Avago Technologies
Avago Technologies optocouplers for IPM (Intelligent Power Module) interface exhibit short propagation delay, fast IGBT switching, high common mode transient rejection and wide operating temperature range.
Avago Technologies R2Coupler™ isolation products provide the reinforced insulation and reliability needed for critical automotive and high temperature applications.
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
FestoKonnektör A
R 1/8
Konnektör B
İterek Sokma 6 mm
Pnömatik Bağlantı Elemanı Tipi
Dirsek Dişli Adaptörü
Bağlantı Stili
Dişli - Boru
Üretici Serisi
NPQP
Model Number p
133053
Model Numarası (p)
133053
Maksimum Çalışma Basıncı
10 bar
Kimyasal Maddelere Dayanıklı
Yes
Gövde Malzemesi
Polipropilen
Minimum Çalışma Sıcaklığı
-20°C
Gıda Sınıfı
Yes
Maksimum Çalışma Sıcaklığı
+60°C
Karşılanan Standartlar
ANSI/NSF 51, FDA 21 CFR 177.1520, FDA 21 CFR 177.2600, NSF H1 Reg. No. 123961
Konnektör A
R 1/8
Menşe
Japan
Ürün Ayrıntıları
NPQP Thread to Tube Elbow Push in Fittings
Festo NPQP range of push in elbow connectors that are designed to easily connect tubing and provide a reliable seal. Polypropylene fitting for use in applications with extreme media influences. For pneumatic applications with a temperature range up to 60°C and a pressure range up to 10 bar. Featuring high corrosion resistance (CRC3) and chemical resistance. The NPQP range is an alternative to stainless steel fittings for the food and beverage industry, biotechnology/pharmaceuticals, medical technology, clean rooms and process automation.
Optocoupler, Intelligent Power Module (IPM) Interface, Avago Technologies
Avago Technologies optocouplers for IPM (Intelligent Power Module) interface exhibit short propagation delay, fast IGBT switching, high common mode transient rejection and wide operating temperature range.
Avago Technologies R2Coupler™ isolation products provide the reinforced insulation and reliability needed for critical automotive and high temperature applications.