RF Adaptörü, PC 3.5 Soket - PC 3.5 Soket, 50Ω, 33GHz, Düz

Teknik Belgeler
Özellikler
Marka
Huber+SuhnerAdaptör Tipi
PC 3.5 Soket - PC 3.5 Soket
Adaptör Tipi A
PC3.5
Adaptör Tipi B
PC3.5
Cinsiyet A
Dişi
Cinsiyet B
Dişi
Empedans
50Ω
Gövde Yönü
Düz
Çalışma Frekansı
33GHz
Polarite
Normal
Kontak Kaplaması
E-nikel üstüne Altın
Uzunluk
28.36mm
Kontak Malzemesi
Berilyum Bakır, Paslanmaz Çelik
Menşe
Switzerland
Ürün Ayrıntıları
Hubner+Suhner Adaptors for QMA interfaces
Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.
HUBER+SUHNER QMA
The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.
10.440,40 TL
10.440,40 TL Each (KDV Hariç)
12.528,48 TL
12.528,48 TL Each KDV Dahil
1

10.440,40 TL
10.440,40 TL Each (KDV Hariç)
12.528,48 TL
12.528,48 TL Each KDV Dahil
1

Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Miktar | Birim Fiyat |
---|---|
1 - 9 | 10.440,40 TL |
10 - 24 | 9.396,74 TL |
25+ | 8.875,18 TL |
Teknik Belgeler
Özellikler
Marka
Huber+SuhnerAdaptör Tipi
PC 3.5 Soket - PC 3.5 Soket
Adaptör Tipi A
PC3.5
Adaptör Tipi B
PC3.5
Cinsiyet A
Dişi
Cinsiyet B
Dişi
Empedans
50Ω
Gövde Yönü
Düz
Çalışma Frekansı
33GHz
Polarite
Normal
Kontak Kaplaması
E-nikel üstüne Altın
Uzunluk
28.36mm
Kontak Malzemesi
Berilyum Bakır, Paslanmaz Çelik
Menşe
Switzerland
Ürün Ayrıntıları
Hubner+Suhner Adaptors for QMA interfaces
Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.
HUBER+SUHNER QMA
The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.