TE Connectivity Siyah Isıyla Daralan Makaron, 4,8mm, Büzüşme Oranı: 3:1, 300mm Uzunluğunda
Teknik Belgeler
Özellikler
Marka
TE ConnectivityManşon Çapı
4.8mm
Renk
Siyah
Büzülmüş Çap
1.5mm
Manşon Tipi
Isı Büzüşmeli
Yapışkan Astarlı Parça
No
Büzülme Oranı
3:1
Manşon Uzunluğu
300mm
Malzeme
Poliolefin
Çalışma Sıcaklığı Aralığı
-55 → +110 °C
Alev Geciktirici
No
Halojensiz
No
Seri
SCL
Ürün Ayrıntıları
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.
2.555,55 TL
511,11 TL Each (In a Pack of 5) (KDV Hariç)
3.066,66 TL
613,332 TL Each (In a Pack of 5) KDV Dahil
5
2.555,55 TL
511,11 TL Each (In a Pack of 5) (KDV Hariç)
3.066,66 TL
613,332 TL Each (In a Pack of 5) KDV Dahil
5
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
TE ConnectivityManşon Çapı
4.8mm
Renk
Siyah
Büzülmüş Çap
1.5mm
Manşon Tipi
Isı Büzüşmeli
Yapışkan Astarlı Parça
No
Büzülme Oranı
3:1
Manşon Uzunluğu
300mm
Malzeme
Poliolefin
Çalışma Sıcaklığı Aralığı
-55 → +110 °C
Alev Geciktirici
No
Halojensiz
No
Seri
SCL
Ürün Ayrıntıları
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.