Teknik Belgeler
Özellikler
Marka
BroadcomMontaj Tipi
Yüzeye Monte
Maksimum Çalışma Besleme Gerilimi
5,5 V
Minimum Çalışma Besleme Gerilimi
4,5 V
Paket Tipi
TSSOP-16
Pim Sayısı
16
Maksimum Çalışma Sıcaklığı
+125°C
Minimum Çalışma Sıcaklığı
40 °C
Ürün Ayrıntıları
Magnetic Encoders
The magnetic encoder IC range from Avago Technologies consists of contactless 10-bit to 16-bit programmable magnetic rotary encoders. They offer an internal voltage regulator and precise angular measurements throughout a full turn of 360°. A simple two-pole magnet is able to measure the angle by rotating it over the centre of the chip, positioned above or below the IC. The Avago magnetic rotary encoder IC is a system-on-chip (SoC), combining analog front end, digital signal processing and integrated Hall elements in a single device. A power-down mode is also available for the magnetic encoders in order to reduce current consumption. The Avago Technologies encoder ICs offer a user-programmable zero position, direction and index pulse width. A variety of possible applications include 3-phase commutation for brushless DC motor, resolver and potentiometer replacement and industrial automation and robotics.
Avago Technologies Rotary Encoders
489.438,72 TL
504,576 TL Each (In a Tube of 970) (KDV Hariç)
587.326,46 TL
605,491 TL Each (In a Tube of 970) KDV Dahil
970
489.438,72 TL
504,576 TL Each (In a Tube of 970) (KDV Hariç)
587.326,46 TL
605,491 TL Each (In a Tube of 970) KDV Dahil
970
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
BroadcomMontaj Tipi
Yüzeye Monte
Maksimum Çalışma Besleme Gerilimi
5,5 V
Minimum Çalışma Besleme Gerilimi
4,5 V
Paket Tipi
TSSOP-16
Pim Sayısı
16
Maksimum Çalışma Sıcaklığı
+125°C
Minimum Çalışma Sıcaklığı
40 °C
Ürün Ayrıntıları
Magnetic Encoders
The magnetic encoder IC range from Avago Technologies consists of contactless 10-bit to 16-bit programmable magnetic rotary encoders. They offer an internal voltage regulator and precise angular measurements throughout a full turn of 360°. A simple two-pole magnet is able to measure the angle by rotating it over the centre of the chip, positioned above or below the IC. The Avago magnetic rotary encoder IC is a system-on-chip (SoC), combining analog front end, digital signal processing and integrated Hall elements in a single device. A power-down mode is also available for the magnetic encoders in order to reduce current consumption. The Avago Technologies encoder ICs offer a user-programmable zero position, direction and index pulse width. A variety of possible applications include 3-phase commutation for brushless DC motor, resolver and potentiometer replacement and industrial automation and robotics.