Teknik Belgeler
Özellikler
Marka
MolexKontakların Sayısı
6
Kontak Malzemesi
Fosfor Bronz
Hatve
0.5mm
Montaj Tipi
Yüzeye Monte
Cinsiyet
Erkek
Sonlandırma Tipi
ZIF Alt Kontak
Gövde Yönü
Dik Açı
Akım Değeri
500mA
Gerilim Değeri
50 V
Seri
Easy-On
Seri Numarası
505110
Sıraların Sayısı
1
Sonlandırma Yöntemi
Lehim
Kontak Kaplaması
Nikel üstüne Altın
Minimum Çalışma Sıcaklığı
-40°C
Muhafaza Malzemesi
Sıvı Kristal Polimer
Maksimum Çalışma Sıcaklığı
+105°C
Menşe
Japan
Ürün Ayrıntıları
Molex Easy-On 0.50mm FFC/FPC Connectors with Double-Bottom Contacts, 505110 Series
Easy-On 0.50 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 0.50 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 0.50 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 0.50 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 0.50 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.
0.5mm FFC - Molex
Teklif İsteyiniz
Each (Supplied on a Reel) (KDV Hariç)
Üretime Uygun Paketleme (Makara)
10
Teklif İsteyiniz
Each (Supplied on a Reel) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
Üretime Uygun Paketleme (Makara)
10
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
MolexKontakların Sayısı
6
Kontak Malzemesi
Fosfor Bronz
Hatve
0.5mm
Montaj Tipi
Yüzeye Monte
Cinsiyet
Erkek
Sonlandırma Tipi
ZIF Alt Kontak
Gövde Yönü
Dik Açı
Akım Değeri
500mA
Gerilim Değeri
50 V
Seri
Easy-On
Seri Numarası
505110
Sıraların Sayısı
1
Sonlandırma Yöntemi
Lehim
Kontak Kaplaması
Nikel üstüne Altın
Minimum Çalışma Sıcaklığı
-40°C
Muhafaza Malzemesi
Sıvı Kristal Polimer
Maksimum Çalışma Sıcaklığı
+105°C
Menşe
Japan
Ürün Ayrıntıları
Molex Easy-On 0.50mm FFC/FPC Connectors with Double-Bottom Contacts, 505110 Series
Easy-On 0.50 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 0.50 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 0.50 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 0.50 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 0.50 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.