MTL 3 Fazlı, 270 V ac, 45kA, MA3100 Serisi
Teknik Belgeler
Özellikler
Marka
EatonBastırıcı Tipi
3 Fazlı
Maksimum Gerilim Değeri
270 V ac
Montaj Tipi
DIN Rayı
Maksimum Ani Akım
45kA
Seri
MA3100
Uzunluk
89mm
Derinlik
65mm
Yükseklik
92mm
Boyutlar
89 x 65 x 92mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Ürün Ayrıntıları
Single & 3-phase Mains MA3100 Series
Surge protection designed to cope with high magnitude 10 / 350μs current waveforms as described in IEC 61312.
Approvals
UL 1449
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
28.153,22 TL
28.153,22 TL Each (KDV Hariç)
33.783,86 TL
33.783,86 TL Each KDV Dahil
1
28.153,22 TL
28.153,22 TL Each (KDV Hariç)
33.783,86 TL
33.783,86 TL Each KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
EatonBastırıcı Tipi
3 Fazlı
Maksimum Gerilim Değeri
270 V ac
Montaj Tipi
DIN Rayı
Maksimum Ani Akım
45kA
Seri
MA3100
Uzunluk
89mm
Derinlik
65mm
Yükseklik
92mm
Boyutlar
89 x 65 x 92mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Ürün Ayrıntıları
Single & 3-phase Mains MA3100 Series
Surge protection designed to cope with high magnitude 10 / 350μs current waveforms as described in IEC 61312.
Approvals
UL 1449
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.