LeCroy PP006C Osiloskop Probu, 500MHz, Prob Tipi: Pasif
Teknik Belgeler
Özellikler
Marka
Teledyne LeCroyProb Tipi
Pasif
Zayıflatma
1:10
Bant Genişliği
500MHz
Model Number p
PP006C
Seri
WaveJet Touch
Güvenlik Kategorisi
Cat I 1400 (Transient Over Voltage) V, Cat I 350 Vrms, Cat II 300 Vrms
Menşe
Japan
Ürün Ayrıntıları
Teledyne LeCroy Passive Probe PP006C
Passive probes are the standard probe provided with most oscilloscopes. They are also sold as separate items and as replacements. The PP006C has 500 MHz bandwidth, 12 pF input capacitance and 5 mm probe tip diameter. It is typical of passive probes in that it provides a 10:1 attenuation and features a high resistance of 10 MΩ. Its high input resistance makes the passive probe a choice instrument for low frequency signals, because circuit loading at such frequencies is minimised. Passive probes are designed to handle voltages of at least 400 V. The PP006C handles up to 500 V. Teledyne LeCroy passive probes feature an attenuation sense pin which activates the oscilloscope to scale waveforms automatically, with no operator input.
Supplied with
Sprung hook, ground lead 11 cm, ground lead on probe tip, IC insulating tip, colour bands (yellow, red, blue, green - 2 off each), trimmer tool
Passive Oscilloscope Probes
16.730,30 TL
16.730,30 TL Each (KDV Hariç)
20.076,36 TL
20.076,36 TL Each KDV Dahil
1
16.730,30 TL
16.730,30 TL Each (KDV Hariç)
20.076,36 TL
20.076,36 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
Teledyne LeCroyProb Tipi
Pasif
Zayıflatma
1:10
Bant Genişliği
500MHz
Model Number p
PP006C
Seri
WaveJet Touch
Güvenlik Kategorisi
Cat I 1400 (Transient Over Voltage) V, Cat I 350 Vrms, Cat II 300 Vrms
Menşe
Japan
Ürün Ayrıntıları
Teledyne LeCroy Passive Probe PP006C
Passive probes are the standard probe provided with most oscilloscopes. They are also sold as separate items and as replacements. The PP006C has 500 MHz bandwidth, 12 pF input capacitance and 5 mm probe tip diameter. It is typical of passive probes in that it provides a 10:1 attenuation and features a high resistance of 10 MΩ. Its high input resistance makes the passive probe a choice instrument for low frequency signals, because circuit loading at such frequencies is minimised. Passive probes are designed to handle voltages of at least 400 V. The PP006C handles up to 500 V. Teledyne LeCroy passive probes feature an attenuation sense pin which activates the oscilloscope to scale waveforms automatically, with no operator input.
Supplied with
Sprung hook, ground lead 11 cm, ground lead on probe tip, IC insulating tip, colour bands (yellow, red, blue, green - 2 off each), trimmer tool
Passive Oscilloscope Probes