Teknik Belgeler
Özellikler
DC Erteleme Gerilimi
135V
Minimum Çalışma Sıcaklığı
-55°C
DC Ateşleme Aşırı Gerilimi
350V
Maksimum Çalışma Sıcaklığı
+105°C
Maksimum Ani Akım
10A
Darbe Ateşleme Aşırı Gerilimi
875V
Montaj Tipi
Yüzeye Monte
Bastırıcı Tipi
2 Elektrotlu Gaz Tahliye Borusu
Kapasitans
1pF
Uzunluk
7.9mm
Derinlik
6mm
Yükseklik
7.5mm
Marka
BournsBoyutlar
7.9 x 6 x 7.5mm
Seri
2029
Menşe
Costa Rica
Ürün Ayrıntıları
Optek Magnetic Hall Effect Sensor
Range of hallogic hall-effect sensors from Optek are designed for use within non-contact switching operations. The hall-effect sensors comprise of an integrated monolithic circuit with hall element, linear amplifier & Schmitt trigger all on a single silicone chip.
Thanks to this robust design, this range of hall-effect sensors operate with excellent temperature stability in more demanding environments.
The Optek hallogic hall-effect sensors allow for direct driving more than 7 TTL loads. Also supports standard logic family for power supplies ranging from 4.5 V to 24 V, with switching frequencies from DC to 200 kHz.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
11,146 TL
Each (On a Reel of 500) KDV Hariç
13,375 TL
Each (On a Reel of 500) KDV Dahil
500
11,146 TL
Each (On a Reel of 500) KDV Hariç
13,375 TL
Each (On a Reel of 500) KDV Dahil
500
Teknik Belgeler
Özellikler
DC Erteleme Gerilimi
135V
Minimum Çalışma Sıcaklığı
-55°C
DC Ateşleme Aşırı Gerilimi
350V
Maksimum Çalışma Sıcaklığı
+105°C
Maksimum Ani Akım
10A
Darbe Ateşleme Aşırı Gerilimi
875V
Montaj Tipi
Yüzeye Monte
Bastırıcı Tipi
2 Elektrotlu Gaz Tahliye Borusu
Kapasitans
1pF
Uzunluk
7.9mm
Derinlik
6mm
Yükseklik
7.5mm
Marka
BournsBoyutlar
7.9 x 6 x 7.5mm
Seri
2029
Menşe
Costa Rica
Ürün Ayrıntıları
Optek Magnetic Hall Effect Sensor
Range of hallogic hall-effect sensors from Optek are designed for use within non-contact switching operations. The hall-effect sensors comprise of an integrated monolithic circuit with hall element, linear amplifier & Schmitt trigger all on a single silicone chip.
Thanks to this robust design, this range of hall-effect sensors operate with excellent temperature stability in more demanding environments.
The Optek hallogic hall-effect sensors allow for direct driving more than 7 TTL loads. Also supports standard logic family for power supplies ranging from 4.5 V to 24 V, with switching frequencies from DC to 200 kHz.