Teknik Belgeler
Özellikler
Aydınlatmalı
No
Seri
BMX XTS CPS
Maximum Speed No Load
14 → 19mm/s
Kontak Yapılandırması
1 NO + 1 NC
Maksimum Çalışma Sıcaklığı
+70°C
Minimum Çalışma Sıcaklığı
-25°C
Seri
D Series
Montaj Tipi
Panel Montajı
Besleme Gerilimi
26V
Dolap Aydınlatma Tipi
LED Illumination Unit
Bobin Direnci
75 Ω
IP Değeri
IP67, IP69K
Panel Oyuğu Çapı
22mm
Kontak Yapılandırması
Tek Kutuplu Tek Atımlı (SPST)
Dış Çap
171.4мм
Marka
EatonPaket/Kılıf
1502
Crimp Terminal 1
Pico-SPOX
Menşe
Germany
Ürün Ayrıntıları
IDEM Guardian Line GLS Standard Safety Rope Pull Switches
The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.
Approvals
CE, cULus, TUV.
Standards
IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
2.420,47 TL
Each KDV Hariç
2.904,56 TL
Each KDV Dahil
1
2.420,47 TL
Each KDV Hariç
2.904,56 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Aydınlatmalı
No
Seri
BMX XTS CPS
Maximum Speed No Load
14 → 19mm/s
Kontak Yapılandırması
1 NO + 1 NC
Maksimum Çalışma Sıcaklığı
+70°C
Minimum Çalışma Sıcaklığı
-25°C
Seri
D Series
Montaj Tipi
Panel Montajı
Besleme Gerilimi
26V
Dolap Aydınlatma Tipi
LED Illumination Unit
Bobin Direnci
75 Ω
IP Değeri
IP67, IP69K
Panel Oyuğu Çapı
22mm
Kontak Yapılandırması
Tek Kutuplu Tek Atımlı (SPST)
Dış Çap
171.4мм
Marka
EatonPaket/Kılıf
1502
Crimp Terminal 1
Pico-SPOX
Menşe
Germany
Ürün Ayrıntıları
IDEM Guardian Line GLS Standard Safety Rope Pull Switches
The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.
Approvals
CE, cULus, TUV.
Standards
IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.